New Occupational Certificate Apprenticeships
Civil
In the Civils department, training as a Bricklayer, carpenter, Plumber or Hot Water Solar Installer are provide. Please click on the relevant tab to the right to see the details of the couses offered.
| BRICKLAYER | ||
| COURSE | CREDITS | DURATION |
| (in days) | ||
| KNOWLEDGE MODULES | 85 | 34 |
| PRACTICAL MODULES | 136 | 55 |
| TOTALS: | 221 | 89 |
SAQA QUAL ID: 93627
|
COURSE CODE. |
CURRICULUM TITLE. |
MOD DETAILS |
DURATION |
|
(in days) |
|||
|
BRICKLAYER |
|
89 |
|
|
4698 |
Health, Safety, Quality and Legislation (KM-01) |
KM/3/10 |
4 |
|
4699 |
Environment, Energy Efficiency and Ethics (KM-02) |
KM/4/5 |
2 |
|
4700 |
Tools, Equipment, Materials and Workshop Practice (KM-03) |
KM/3/20 |
8 |
|
4701 |
Drawings and Applied Sciences (KM-04) |
KM/4/10 |
4 |
|
4702 |
Industry Contexts (KM-05) |
KM/3/5 |
2 |
|
4703 |
Communication Theory (KM-06) |
KM/3/5 |
2 |
|
4704 |
Bricklaying, Blockwork and Masonry Theory (KM-06) |
KM/4/12 |
5 |
|
4705 |
Paving Theory (KM-07) |
KM/4/10 |
4 |
|
4706 |
Transfer Levels, (KM-08) |
KM/4/8 |
3 |
|
|
Total number of Credits for Knowledge Modules: |
85 |
34 |
|
|
|
||
|
4707 |
Conduct preparatory activities, repair and/or alteration work to structures using bricks (face and plaster), stone (natural and pre-cut) and block including the building of substructures (PM-01) |
PM/3/10 |
4 |
|
4708 |
Lay different types of bricks using mortar to build superstructures and decorative structures (PM-02) |
PM/3/30 |
12 |
|
4709 |
Lay different types of stone and pre-cut stone using mortar to build superstructures and decorative structures (PM-03) |
PM/3/30 |
12 |
|
4710 |
Lay different types of blocks using mortar to build superstructures and decorative structures (PM-04) |
PM/3/30 |
12 |
|
4711 |
Lay paving and other structures (PM-05) |
PM/3/10 |
4 |
|
4712 |
Conduct finishing operation (PM-06) |
PM/2/8 |
4 |
|
4713 |
Undertake quality testing and assurance activities (PM-07) |
PM/3/10 |
4 |
|
4714 |
Conduct housekeeping and waste removal activities (PM-08) |
PM/2/8 |
3 |
|
|
Total number of Credits for Practical Skill Modules: |
136 |
55 |
|
4761 |
Apprentice Bricklayer– Selected Modules |
|
Context 1 Super Structures |
Work Experience Modules |
|||||
|
|
Planning and preparation processes for bricklaying, work area, material, tools and equipment within the construction environment |
WM/4/25 |
The Work Experience modules will be the logbook items to be covered on a work site practising different bricklayer processes. The learner will complete at least 27 months of on-site practice compiled in a POE form for submission in order to be eligible to apply for a trade test at an accredited Trade Test Centre. |
|||
|
|
Brick laying processes to construct, repair and/or make alterations to substructures |
WM/4/90 |
||||
|
|
Finishing operations and processes to construct or repair superstructures |
WM/4/25 |
||||
|
|
Total number of Credits for Work Experience Modules: |
140 |
|
|||
|
Context 2: Sub Structures |
Work Experience Modules |
|||||
|
|
Planning and preparation processes for bricklaying, work area, material, tools and equipment within the construction environment |
WM/4/25 |
The Work Experience modules will be the logbook items to be covered on a work site practising different bricklayer processes. The learner will complete at least 27 months of on-site practice compiled in a POE form for submission in order to be eligible to apply for a trade test at an accredited Trade Test Centre. |
|||
|
|
Brick laying processes to construct, repair and/or make alterations to substructures |
WM/4/90 |
||||
|
|
Finishing operations and processes to construct or repair superstructures |
WM/4/25 |
||||
|
|
Total number of Credits for Work Experience Modules: |
140 |
|
|||
|
Context 3: Paving and other structures |
Work Experience Modules |
|||||
|
|
Planning and preparation processes for bricklaying, work area, material, tools and equipment within the construction environment |
WM/4/25 |
The Work Experience modules will be the logbook items to be covered on a work site practising different bricklayer processes. The learner will complete at least 27 months of on-site practice compiled in a POE form for submission in order to be eligible to apply for a trade test at an accredited Trade Test Centre. |
|||
|
|
Brick laying processes to construct, repair and/or make alterations to paving and other structures |
WM/4/90 |
||||
|
|
Finishing operations and processes to construct or repair superstructures |
WM/4/25 |
||||
|
|
Total number of Credits for Work Experience Modules: |
140 |
|
|||
| CARPENTER | ||
| COURSE | CREDITS | DURATION |
| (in days) | ||
| KNOWLEDGE MODULES | 72 | 30 |
| PRACTICAL MODULES | 108 | 45 |
| TOTALS: | 180 | 75 |
SAQA QUAL ID: 94022
|
COURSE CODE. |
CURRICULUM TITLE. |
MOD DETAILS |
DURATION |
|
|
(in days) |
|
|||
|
CARPENTER |
|
75 |
|
|
|
4680 |
Health, Safety, Quality and Legislation (KM-01) |
KM/3/10 |
4 |
|
|
4681 |
Environment, Energy Efficiency and Ethics (KM-02 |
KM/4/5 |
2 |
|
|
4682 |
Tools, Equipment, Materials and Workshop Practice (KM-03) |
KM/3/20 |
6 |
|
|
4683 |
Drawings and Applied Sciences (KM-04) |
KM/4/10 |
4 |
|
|
4684 |
Industry Contexts (KM-05) |
KM/3/5 |
2 |
|
|
4685 |
Communication Theory (KM-06) |
KM/3/5 |
2 |
|
|
4686 |
Carpentry Formwork and cutting (KM-07) |
KM/4/5 |
2 |
|
|
4687 |
Shoring trenches/excavations (KM-08) |
KM/4/4 |
2 |
|
|
4688 |
Roofing (KM-09) |
KM/4/3 |
2 |
|
|
4689 |
Partitioning/ceiling (KM-10) |
KM/4/2 |
2 |
|
|
4690 |
Carpentry finishing (KM-11) |
KM/4/3 |
2 |
|
|
|
Total number of Credits for Knowledge Modules: |
72 |
30 |
|
|
|
|
|||
|
4691 |
Set out work area (PM-01) |
PM/4/18 |
7 |
|
|
4692 |
Cut materials according to specifications using hand and power tools (PM-02) |
PM/3/12 |
5 |
|
|
4693 |
Install structures (PM-03) |
PM/4/16 |
7 |
|
|
4694 |
Fabricate erect and strip steel and timber formwork (PM-04) |
PM/4/18 |
7 |
|
|
4695 |
Prepare and erect ceilings, roof trusses, partitions and panelling (PM-05) |
PM/3/15 |
6 |
|
|
4696 |
Clad roof structures (PM-06) |
PM/3/14 |
6 |
|
|
4697 |
Finish carpentry activities (PM-07) |
PM/3/15 |
7 |
|
|
|
Total number of Credits for Practical Skill Modules: |
108 |
45 |
|
|
4762 |
Apprentice Carpenter– Selected Modules |
|
|
|
|||||
|
|
Work in a construction environment to plan and prepare for carpentry activities (WM-01) |
WM/3/260 |
The Work Experience modules will be the logbook items to be covered on a work site practising different Carpentry modules. The learner will complete at least 27 months of on-site practice compiled in a POE form for submission in order to be eligible to apply for a trade test at an accredited Trade Test Centre. |
|||
|
|
Constructing, erecting and installing formwork within the construction environment, Or (WM-02) |
WM/4/120 |
||||
|
|
Constructing, erecting and installing roofing and partitioning within the construction environment, Or (WM-03) |
WM/4/120 |
||||
|
|
Finish preparing, fitting, assembling and altering internal and external fixtures in the construction environment (WM-04) |
WM/4/120 |
||||
|
|
Total number of Credits for Work Experience Modules: |
180 |
|
|||
| PLUMBER | ||
| COURSE | CREDITS | DURATION |
| (in days) | ||
| KNOWLEDGE MODULES | 100 | 40 |
| PRACTICAL MODULES | 130 | 56 |
| TOTALS: | 230 | 96 |
SAQA QUAL ID: 91782
|
COURSE CODE. |
CURRICULUM TITLE. |
MOD DETAILS |
DURATION |
|
(in days) |
|||
|
PLUMBER |
|
96 |
|
|
|
|
||
|
4715 |
Health, Safety, Quality and Legislation (KM-01) |
KM/3/3 |
1 |
|
4716 |
Environment, Energy Efficiency and Ethics (KM-02) |
KM/4/5 |
2 |
|
4717 |
Tools, Equipment, Components and Site Practice (KM-03) |
KM/3/3 |
1 |
|
4718 |
Drawings and Applied Sciences (KM-04) |
KM/4/7 |
3 |
|
4719 |
Theory of Water and Drainage Excavation (KM-05) |
KM/4/8 |
3 |
|
4720 |
Above and Below Ground Drainage Systems (KM-06) |
KM/4/43 |
17 |
|
4721 |
Sanitary ware (KM-07) |
KM/4/4 |
2 |
|
4722 |
Hot and cold water systems (KM-08) |
KM/4/18 |
7 |
|
4723 |
Installation and Maintenance Theory for Plumbing Systems (KM-08) |
KM/4/9 |
4 |
|
|
Total number of Credits for Knowledge Modules: |
100 |
40 |
|
|
|
||
|
4724 |
Install, maintain and test above-ground soil waste and vent systems and sanitary ware appliances (PM-01) |
PM/4/30 |
13 |
|
4725 |
Install, maintain and test below-ground drainage systems (PM-02) |
PM/4/35 |
15 |
|
4726 |
Install, maintain and test cold water and hot water systems (PM03) |
PM/4/35 |
15 |
|
4727 |
Install, maintain and test rain water systems (PM-04 |
PM/4/30 |
13 |
|
|
Total number of Credits for Practical Skill Modules: |
130 |
56 |
|
4759 |
Apprentice Plumber– Selected Modules |
|
EVIDENCE FOR THE LOGBOOK |
|||
|
|
Work Experience Modules |
||
|
|
Processes and procedures for installation and testing of above ground soil waste and vent systems and sanitary ware appliances |
WM/4/30 |
The Work Experience modules will be the logbook items to be covered on a work site practising different Plumbing installations. The learner will complete at least 24 months of on-site practice compiled in a POE form for submission in order to be eligible to apply for a trade test at an accredited Trade Test Centre. |
|
|
Processes and procedures for installation and testing of below-ground drainage systems and performing basic building work |
WM/4/35 |
|
|
|
Procedures and processes for installation and maintenance of cold and hot water systems |
WM/4/35 |
|
|
|
Procedures and processes for installation and maintenance of rain water systems |
WM/4/30 |
|
|
|
Total number of Credits for Work Experience Modules: |
130 |
|
| SOLAR HOT WATER INSTALLER | |||
| COURSE | CREDITS | DURATION | |
| (in days) | |||
| KNOWLEDGE MODULES | 14 | 7 | |
| PRACTICAL MODULES | 23 | 13 | |
| TOTALS: | 37 | 20 | |
SAQA I.D. 94619
|
COURSECODE. |
CURRICULUM TITLE. |
MOD DETAIL |
DURATION (IN DAYS) |
|
4795 |
SOLAR HOT WATER INSTALLER |
|
20 |
|
|
|
||
|
|
Theory of Water (KM01) |
KM/4/2 |
1 |
|
|
Solar Water Heating Tools, Equipment and Components (KM02) |
KM/4/2 |
1 |
|
|
Solar Water Heating Systems. (KM03) |
KM/4/3 |
2 |
|
|
Preparation, Installation and Maintenance Theory for Solar Water Heating Systems. (KM04) |
KM/4/7 |
3 |
|
|
|
14 |
7 |
|
|
|
||
|
|
Plan and prepare for the installation of pipes and mounting of solar water heating system. (PM01) |
PM/2/2 |
1 |
|
|
Read and interpret construction drawings and specifications. (PM02) |
PM/2/2 |
1 |
|
|
Install pipes and pipe fittings. (PM03) |
PM/2/3 |
2 |
|
|
Mount and fit solar water heating system. (PM04) |
PM/2/3 |
2 |
|
|
Erect, use and dismantle access equipment for construction work. (PM05) |
PM/3/3 |
2 |
|
|
Prepare and plan for the installation of solar water heating systems in a safe and compliant environment. (PM06) |
PM/4/3 |
2 |
|
|
Install solar water heating systems. (PM07) |
PM/4/5 |
2 |
|
|
Conduct maintenance and make repairs to solar water heating systems. (PM08) |
PM/4/2 |
1 |
|
|
|
23 |
13 |
|
4796 |
Hot Water System Installer– Selected Modules |
|
EVIDENCE FOR THE LOGBOOK |
||||
|
|
Work Experience Modules |
|
||
|
Processes and procedures for mounting solar water heating systems |
WM/02/6 |
Foundational learning competence is a pre-requisite for the awarding this qualification. In order to qualify for an external assessment, learners must provide proof of completion of all required modules by means of statements of results and work experience which are captured in a work logbook. |
|
|
|
Site preparation and planning processes for the installation of solar water heating systems in specific environmental conditions |
WM/03/5 |
|
||
|
Processes and procedures for solar water heating system installation, testing, commissioning and housekeeping |
WM/04/10 |
|
||
|
Procedures and processes for assessment, diagnosis, fault finding, repair and maintenance activities |
WM/04/9 |
|
||
Engineering
- Introduction
- Automotive Motor Mechanic
- Boilermaker
- Electrician
- Fitter
- Fitter and Turner
- Metal Machinist
- Millwright (Mechanical)
- Millwright (Electrical)
- Welder
In the Engineering department, training as an Automotive Mechanic, Boilermaker, Electrician, Fitter, Fitter and Turner, Metal Machinist, Millwright (Mechanical), Millwright (Electricla) or a Welder is provided. Please click on the relevant name to the right to see the details of the couses offered.
|
AUTOMOTIVE MOTOR MECHANIC |
|
|
||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4493 |
653101000 |
AUTOMOTIVE MOTOR MECHANIC ARTISAN APPRENTICE YEAR 1 |
88.77 |
63 |
|
4494 |
653101000 |
AUTOMOTIVE MOTOR MECHANIC ARTISAN APPRENTICE YEAR 2 |
108.37 |
87 |
|
4495 |
653101000 |
AUTOMOTIVE MOTOR MECHANIC ARTISAN APPRENTICE YEAR 3 |
72.86 |
35 |
|
|
|
TOTALS: |
270.00 |
185 |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: AUTOMOTIVE MOTOR MECHANIC
SAQA QUAL ID: 118733
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4493 |
653101000 |
AUTOMOTIVE MOTOR MECHANIC ARTISAN APPRENTICE YEAR 1 |
88.77 |
63 |
|
|
|
|
|
|
|
4496 |
MODULES |
INDUCTION |
9.00 |
5 |
|
|
AMM-TH01-MO1 |
Induction |
|
|
|
|
KM01 KT01 |
Employment |
0.50 |
|
|
|
KM01 KT02 |
Organization of work |
0.99 |
|
|
|
KM01 KT03 |
Employer-Employee relationships |
0.99 |
|
|
|
KM01 KT04 |
Concepts related to the performance of work |
1.98 |
|
|
|
KM01 KT05 |
Types and structure of employer organizations and the impact of the external environment |
1.98 |
|
|
|
KM01 KT06 |
Information and communication technology at work |
0.99 |
|
|
|
KM01 KT07 |
Ethics at work |
0.50 |
|
|
|
KM01 KT08 |
Current trends influencing work |
1.08 |
|
|
|
|
|
|
|
|
4497 |
MODULES |
FOUNDATIONAL CONCEPTS FOR MECHANICS |
13.01 |
5 |
|
|
AMM-TH02-MO1 |
Foundational concepts for mechanics |
|
|
|
|
KM02 KT01 |
The world of engine, motor, vehicle and light and heavy equipment repair |
2.10 |
|
|
|
KM02 KT02 |
Servicing and maintenance |
2.10 |
|
|
|
KM02 KT03 |
Physics |
1.96 |
|
|
|
KM02 KT05 |
Vehicle and equipment construction |
1.96 |
|
|
|
KM02 KT06 |
Additional engine applications |
1.96 |
|
|
|
KM02 KT07 |
Operation and application of alternative vehicle propulsion technologies |
0.98 |
|
|
|
KM05 KT05 |
Stationary engine systems |
1.95 |
|
|
|
|
|
|
|
|
4498 |
MODULES |
OPERATE A COMPUTER |
5.20 |
2 |
|
|
AMM-TH10-M02 |
Operate a computer |
|
|
|
|
PM02 PS05 |
Perform basic computer operations |
5.20 |
|
|
|
|
|
|
|
|
4499 |
MODULES |
BASIC FIRST AID AND SAFETY SIGNAGE |
1.00 |
3 |
|
|
AMM-TH08-M01 |
Basic First Aid and Safety Signage |
|
|
|
|
PM01 PS01 |
Perform basic first aid |
0.50 |
|
|
|
PM01 PS03 |
Read and respond to safety signage |
0.50 |
|
|
|
|
|
|
|
|
4500 |
MODULES |
BASIC FIRE FIGHTING |
0.50 |
1 |
|
|
AMM-TH08-M02 |
Basic Fire Fighting |
|
|
|
|
PM01 PS02 |
Perform basic fire fighting |
0.50 |
|
|
|
|
|
|
|
|
4501 |
MODULES |
LIFTING EQUIPMENT |
0.50 |
2 |
|
|
AMM-TH08-M03 |
Lifting Equipment |
|
|
|
|
PM01 PS04 |
Identify, use and care for lifting and support equipment |
0.50 |
|
|
|
|
|
|
|
|
4502 |
MODULES |
USE TOOLS AND EQUIPMENT |
20.80 |
10 |
|
|
AMM-TH10-M01 |
Use Tools and equipment |
|
|
|
|
PM02 PS01 |
Identify, use and care for basic hand tools and equipment |
5.20 |
|
|
|
PM02 PS02 |
Identify, use and care for workshop tools and equipment |
5.20 |
|
|
|
PM02 PS03 |
Identify, use and care for measuring equipment |
5.20 |
|
|
|
PM02 PS04 |
Fabricate simple components using basic hand tools |
5.20 |
|
|
4503 |
MODULES |
ARC WELDING |
1.67 |
5 |
|
|
AMM-TH11-M01 |
Arc Weld |
|
|
|
|
PM03 PS01 |
Arc weld metal to specification |
1.67 |
|
|
|
|
|
|
|
|
4504 |
MODULES |
GAS WELDING |
1.67 |
5 |
|
|
AMM-TH11-M02 |
Gas Weld |
|
|
|
|
PM03 PS02 |
Gas weld metal to specification |
1.67 |
|
|
|
|
|
|
|
|
4505 |
MODULES |
GAS CUTTING |
1.67 |
5 |
|
|
AMM-TH11-M03 |
Gas Cut |
|
|
|
|
PM03 PS03 |
Gas cut metal to specification |
1.67 |
|
|
|
|
|
|
|
|
4506 |
MODULES |
BEARINGS, BUSHES, SEALS ,KEYS AND LOCKING DEVICES |
8.00 |
5 |
|
|
AMM-TH02-MO3 |
Bushes & Bearings |
|
|
|
|
KM03 KT04 |
Bushes and bearings |
2.00 |
|
|
|
AMM-TH02-M02 |
Inspect and Install Bearings |
|
|
|
|
PM04 PS03 |
Remove, inspect, maintain and install bearings |
2.00 |
|
|
|
AMM-TH12-M01 |
Remove and Install Mechanical Components |
|
|
|
|
PM04 PS01 |
Use fasteners, keys and locking devices |
2.00 |
|
|
|
PM04 PS02 |
Remove and install gaskets and seals |
2.00 |
|
|
|
|
|
|
|
|
4507 |
MODULES |
VEHICLE HYDRAULICS AND PNEUMATICS |
6.00 |
5 |
|
|
AMM-TH13-MO1 |
Hydraulic and Pneumatic Theory |
|
|
|
|
KM06 KT03 |
Basic hydraulics and pneumatics for engine and vehicle systems |
4.00 |
|
|
|
AMM-TH13-M02 |
Construct and Troubleshoot Hydraulic and Pneumatic Circuits |
|
|
|
|
PM06 PS01 |
Construct and trouble-shoot basic hydraulic circuits |
1.00 |
|
|
|
PM06 PS02 |
Construct and trouble-shoot basic pneumatic circuits |
1.00 |
|
|
|
|
|
|
|
|
4508 |
MODULES |
VEHICLE LUBRICATION, HEATING AND COOLING SYSTEMS |
19.76 |
10 |
|
|
AMM-TH02-MO2 |
Vehicle and Equipment Fundamentals |
|
|
|
|
AMM-TH03-MO1 |
Lubrication systems |
|
|
|
|
AMM-TH03-MO2 |
Heating & Cooling Systems |
|
|
|
|
KM03 KT02 |
Fluids, lubricants, materials and metals applicable to the trade |
2.00 |
|
|
|
KM03 KT03 |
Fundamentals of lubrication |
2.00 |
|
|
|
KM04 KT01 |
Engine lubrication systems |
2.00 |
|
|
|
KM04 KT02 |
Heating and cooling systems |
2.00 |
|
|
|
PM09 PS03 |
Dismantle, assess and reassemble lubrication systems |
1.25 |
|
|
|
PM19 PS05 |
Diagnose and repair lubrication system faults (electrical and sensor components) |
2.86 |
|
|
|
PM07 PS04 |
Test and adjust coolant condition |
1.20 |
|
|
|
PM13 PS01 |
Test and adjust coolant condition |
1.00 |
|
|
|
PM09 PS05 |
Dismantle, assess and reassemble cooling systems |
1.25 |
|
|
|
PM13 PS02 |
Disassemble, assess and reassemble cooling systems |
1.00 |
|
|
|
PM13 PS03 |
Diagnose and repair engine cooling system faults |
1.00 |
|
|
|
PM17 PS01 |
Diagnose and repair engine cooling system faults |
2.20 |
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: AUTOMOTIVE MOTOR MECHANIC
SAQA QUAL ID: 118733
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4494 |
653101000 |
AUTOMOTIVE MOTOR MECHANIC ARTISAN APPRENTICE YEAR 2 |
108.37 |
87 |
|
|
|
|
|
|
|
4509 |
MODULES |
EXHAUST & INDUCTION SYSTEMS |
14.56 |
10 |
|
|
AMM-TH03-MO3 |
Exhaust Systems |
|
|
|
|
KM04 KT04 |
Exhaust systems |
2.00 |
|
|
|
KM04 KT03 |
Induction systems |
2.00 |
|
|
|
PM09 PS06 |
Dismantle, assess and reassemble induction and exhaust systems |
1.25 |
|
|
|
PM17 PS02 |
Diagnose and repair exhaust system faults |
2.20 |
|
|
|
PM11 PS01 |
Remove and refit induction, forced induction and exhaust systems |
0.86 |
|
|
|
PM09 PS07 |
Dismantle, assess and reassemble forced induction systems (turbo chargers) |
1.25 |
|
|
|
PM19 PS04 |
Diagnose and repair forced induction system faults |
2.86 |
|
|
|
PM16 PS01 |
Commission and test induction, forced induction and exhaust systems |
2.14 |
|
|
|
|
|
|
|
|
4510 |
MODULES |
STEERING & SUSPENSION SYSTEMS |
14.99 |
15 |
|
|
AMM-TH04-M07 |
Suspension and Steering Systems (including Tyres, Wheels & Alignment) |
|
|
|
|
KM05 KT01 |
Tyres, wheels and suspension and steering systems |
2.99 |
|
|
|
PM08 PS03 |
Remove, test, repair and refit tyres, and balance and align wheels |
1.33 |
|
|
|
PM10 PS03 |
Disassemble, assess and reassemble steering and suspension systems |
2.00 |
|
|
|
PM11 PS04 |
Remove,and refit tyres, and balance and align wheels |
0.86 |
|
|
|
PM08 PS01 |
Disassemble, assess and reassemble steering and suspension systems |
1.33 |
|
|
|
PM16 PS04 |
Commission and test tyres, and balance and align wheels |
2.14 |
|
|
|
PM08 PS02 |
Remove, test, repair and refit steering and suspension systems |
1.33 |
|
|
|
PM11 PS03 |
Remove and refit steering and suspension systems |
0.86 |
|
|
|
PM16 PS03 |
Commission and test steering and suspension systems |
2.14 |
|
|
|
|
|
|
|
|
4511 |
MODULES |
DRIVE TRAIN SYTEMS |
14.64 |
15 |
|
|
AMM-THO4-MO4 |
Drive Shafts and Transfer Cases |
|
|
|
|
KM05 KT02 |
Drive train systems |
2.99 |
|
|
|
PM10 PS02 |
Dismantle, assess and reassemble drive train system components |
2.00 |
|
|
|
PM11 PS06 |
Remove and refit drive train components |
0.86 |
|
|
|
PM14 PS02 |
Remove, test, repair and refit drivetrain components |
0.50 |
|
|
|
PM14 PS08 |
Diagnose and repair transfer case faults |
0.50 |
|
|
|
PM17 PS08 |
Diagnose and repair transfer case faults |
2.20 |
|
|
|
PM14 PS01 |
Disassemble, assess and reassemble drivetrain system components |
0.50 |
|
|
|
PM16 PS06 |
Commission and test drivetrain components |
2.14 |
|
|
|
AMM-THO4-MO5 |
Differentials and Rear Drive Axles |
|
|
|
|
PM14 PS07 |
Diagnose and repair rear wheel differential faults |
0.50 |
|
|
|
PM17 PS07 |
Diagnose and repair rear wheel differential faults |
2.20 |
|
|
|
AMM-THO4-MO6 |
Transaxles and Front Drive Axles |
|
|
|
|
PM14 PS05 |
Diagnose and repair front wheel drive gearbox and differential faults (manual) |
0.25 |
|
|
4787 |
Automotive Motor Mechanic– Selected Modules |
|
|
|
|
|
|
|
||
|
4512 |
MODULES |
TRANSMISSION SYSTEMS |
13.92 |
10 |
|
||
|
|
AMM-THO4-MO3 |
Automatic Transmission Systems (including gearboxes) |
|
|
|
||
|
|
KM05 KT04 |
Vehicle or equipment transmission systems |
3.12 |
|
|
||
|
|
PM14 PS06 |
Diagnose and repair automatic transmission faults |
0.50 |
|
|
||
|
|
PM17 PS06 |
Diagnose and repair automatic transmission faults |
2.20 |
|
|
||
|
|
AMM-THO4-MO2 |
Manual Transmission Systems (including gearboxes) |
|
|
|
||
|
|
PM14 PS03 |
Diagnose and repair manual transmission faults |
0.50 |
|
|
||
|
|
PM17 PS03 |
Diagnose and repair manual transmission faults |
2.20 |
|
|
||
|
|
PM14 PS04 |
Diagnose and repair rear wheel drive gearbox faults (manual) |
0.50 |
|
|
||
|
|
PM17 PS04 |
Diagnose and repair rear wheel drive gearbox faults (manual) |
2.20 |
|
|
||
|
|
PM14 PS05 |
Diagnose and repair front wheel drive gearbox and differential faults (manual) |
0.5 |
|
|
||
|
|
PM17 PS05 |
Diagnose and repair front wheel drive gearbox and differential faults (manual) |
2.20 |
|
|
||
|
|
|
|
|
|
|
||
|
4513 |
MODULES |
CLUTCH SYSTEMS |
5.15 |
5 |
|
||
|
|
AMM-THO4-MO1 |
Clutch Systems |
|
|
|
||
|
|
KM05 KT03 |
Clutch and pressure plate assemblies |
1.95 |
|
|
||
|
|
PM15 PS03 |
Diagnose and repair clutch faults |
1.00 |
|
|
||
|
|
PM17 PS09 |
Diagnose and repair clutch faults |
2.20 |
|
|
||
|
|
|
|
|
|
|
||
|
4514 |
MODULES |
ELECTRICAL CIRCUITS |
3.00 |
5 |
|
||
|
|
AMM-TH05-M01 |
Fundamentals of Electricity |
|
|
|
||
|
|
KM03 KT01 |
Fundamentals of electricity |
2.00 |
|
|
||
|
|
AMM-TH05-M02 |
Construct and Troubleshoot Auto-Electrical Circuits |
|
|
|
||
|
|
PM05 PS01 |
Construct and trouble-shoot basic auto-electrical circuits |
1.00 |
|
|
||
|
|
|
|
|
|
|
||
|
4515 |
MODULES |
BATTERIES |
1.20 |
2 |
|
||
|
|
AMM-TH05-M03 |
Automotive Batteries |
|
|
|
||
|
|
PM07 PS03 |
Test and maintain batteries |
1.20 |
|
|
||
|
|
|
|
|
|
|
||
|
4516 |
MODULES |
ELECTRICAL SYSTEMS |
23.07 |
15 |
|
||
|
|
AMM-TH05-M04 |
Charging Systems |
|
|
|
||
|
|
KM06 KT01 |
Electrical systems in vehicles and equipment |
4.96 |
|
|
||
|
|
PM09 PS08 |
Dismantle, assess and reassemble engine electrical systems (including conventional ignition systems) |
1.25 |
|
|
||
|
|
AMM-TH05-M05 |
Starting Systems |
|
|
|
||
|
|
PM18 PS01 |
Diagnose and repair starting system faults |
3.50 |
|
|
||
|
|
AMM-TH05-M06 |
Ignition System |
|
|
|
||
|
|
PM18 PS02 |
Diagnose and repair charging system faults |
3.50 |
|
|
||
|
|
PM19 PS01 |
Diagnose and repair ignition system faults |
2.86 |
|
|
||
|
|
AMM-TH05-M07 |
Lighting and Auxiliary Electrical Systems |
|
|
|
||
|
|
PM18 PS03 |
Diagnose and repair lighting system faults |
3.50 |
|
|
||
|
|
PM18 PS04 |
Diagnose and repair auxiliary electrical system faults |
3.50 |
|
|
||
|
|
|
|
|
|
|||
|
4517 |
MODULES |
ELECTRONIC SYSTEMS |
18.10 |
10 |
|||
|
|
AMM-TH05-M08 |
Basic Electronics for Engines, Vehicles and Equipment |
|
|
|||
|
|
KM06 KT02 |
Basic electronics for engines, vehicles and equipment |
7.04 |
|
|||
|
|
PM07 PS01 |
Access electronic control modules and download operational and parameter information |
1.20 |
|
|||
|
|
AMM-TH07-M06 |
Electronic Control Systems |
|
|
|||
|
|
KM07 KT01 |
Electronic control systems |
6.00 |
|
|||
|
|
AMM-TH05-M09 |
Construct and Troubleshoot Auto-Electronic Circuits |
|
|
|||
|
|
PM05 PS02 |
Construct and trouble-shoot basic auto-electronic circuits |
1.00 |
|
|||
|
|
PM19 PS07 |
Diagnose and repair electronic management system faults |
2.86 |
|
|||
|
|
|
|
|
|
|||
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: AUTOMOTIVE MOTOR MECHANIC
SAQA QUAL ID: 118733
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4495 |
653101000 |
AUTOMOTIVE MOTOR MECHANIC ARTISAN APPRENTICE YEAR 3 |
72.86 |
37 |
|
|
|
|
|
|
|
4518 |
|
ENGINES |
9.64 |
15 |
|
|
AMM-TH06-M01 |
Principles of internal combustion engines |
|
|
|
|
KM02 KT04 |
Basic principles of internal combustion engines |
2.94 |
|
|
|
PM07 PS02 |
Prepare and service engine and vehicle sub-systems |
1.20 |
|
|
|
AMM-THO6-MO2 |
Engine Performance and Diagnosis of Common Engine Problems |
|
|
|
|
PM09 PS01 |
Dismantle, assess and reassemble cylinder heads |
1.25 |
|
|
|
PM09 PS02 |
Dismantle, assess and reassemble engine sub-assemblies (bottom end) |
1.25 |
|
|
|
AMM-THO6-MO3 |
Engine Removal, Disassembly, Service, Repair and Re-assembly |
|
|
|
|
PM11 PS07 |
Remove, and refit vehicle engines (commission) |
0.86 |
|
|
|
PM16 PS07 |
Commission and test vehicle engines |
2.14 |
|
|
|
|
|
|
|
|
4519 |
|
FUEL SYSTEMS |
24.36 |
5 |
|
|
AMM-THO7-MO1 |
Fuel Systems |
|
|
|
|
KM07 KT02 |
Fuel systems for diesel engines |
8.10 |
|
|
|
PM07 PS05 |
Bleed air out of diesel fuel systems |
1.20 |
|
|
|
PM19 PS03 |
Diagnose and repair engine fuel system faults |
2.86 |
|
|
|
KM07 KT03 |
Fuel systems for petrol engines |
8.10 |
|
|
|
PM09 PS04 |
Dismantle, assess and reassemble fuel systems |
1.25 |
|
|
|
PM19 PS02 |
Diagnose and repair engine fuel system faults |
2.86 |
|
|
|
|
|
|
|
|
4520 |
|
BRAKING SYSTEMS |
14.10 |
5 |
|
|
AMM-TH07-M02 |
Brakes and braking systems |
|
|
|
|
KM07 KT04 |
Brakes and braking systems |
3.90 |
|
|
|
PM10 PS01 |
Dismantle, assess and reassemble brake systems |
2.00 |
|
|
|
PM11 PS02 |
Remove and refit braking systems |
0.86 |
|
|
|
PM17 PS10 |
Diagnose and repair braking system faults |
2.20 |
|
|
|
PM16 PS02 |
Commission and test braking systems |
2.14 |
|
|
|
PM15 PS01 |
Disassemble, assess and reassemble brake systems |
1.00 |
|
|
|
PM15 PS02 |
Remove, test, repair and refit braking systems |
1.00 |
|
|
|
PM15 PS04 |
Diagnose and repair braking system faults |
1.00 |
|
|
|
|
|
|
|
|
4521 |
|
COMFORT & SAFETY |
3.90 |
2 |
|
|
AMM-THO7-MO3 |
Comfort and Safety Systems |
|
|
|
|
KM07 KT05 |
Comfort and safety systems |
3.90 |
|
|
|
|
|
|
|
|
4522 |
|
AIR CONDITIONING SYSTEMS |
9.86 |
5 |
|
|
AMM-TH07-M05 |
Air-conditioning Systems |
|
|
|
|
PM11 PS05 |
Remove, and refit vehicle air conditioning systems |
0.86 |
|
|
|
PM12 PS01 |
Remove, test, repair and reinstall vehicle air conditioning systems |
2.00 |
|
|
|
PM12 PS02 |
Diagnose and repair air conditioning system faults |
2.00 |
|
|
|
PM19 PS06 |
Diagnose and repair air conditioning system faults |
2.86 |
|
|
|
PM16 PS05 |
Commission and test vehicle air conditioning systems |
2.14 |
|
|
|
|
|
|
|
|
4523 |
|
DIAGNOSTICS |
11.00 |
5 |
|
|
AMM-THO8-MO1 |
Engine Optimisation and Problem-solving Techniques |
|
|
|
|
KM08 KT01 |
Power, performance and pollution |
6.00 |
|
|
|
KM08 KT02 |
Problem solving principles and techniques |
4.00 |
|
|
|
(AMM-GM-M01) |
Principles of Testing and Diagnosing |
|
|
|
|
PM13 PS04 |
Access electronic control modules and download operational and parameter information |
1.00 |
|
|
BOILERMAKER |
|
|
||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4524 |
651203000 |
BOILERMAKER ARTISAN APPRENTICE YEAR 1 |
52.51 |
38 |
|
4525 |
651203000 |
BOILERMAKER ARTISAN APPRENTICE YEAR 2 |
69.48 |
65 |
|
4526 |
651203000 |
BOILERMAKER ARTISAN APPRENTICE YEAR 3 |
93.02 |
68 |
|
|
|
TOTALS: |
215.00 |
171 |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: BOILERMAKER.
SAQA QUAL ID: 93626
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4524 |
651203000 |
BOILERMAKER ARTISAN APPRENTICE YEAR 1 |
52.51 |
38.00 |
|
|
|
|
|
|
|
4527 |
MODULES |
INDUCTION |
9.00 |
8 |
|
|
KM01 KT01 |
Introduction to the Boilermaker Trade |
1.44 |
|
|
|
KM01 KT02 |
Occupational Health, Safety and Environment |
2.52 |
|
|
|
KM01 KT03 |
Quality Control and Quality Assurance Awareness for the Boilermaker |
2.52 |
|
|
|
KM01 KT04 |
Fabrication |
2.52 |
|
|
|
|
|
|
|
|
4528 |
MODULES |
BOILERMAKER TOOLS, EQUIPMENT & MACHINES |
27.13 |
20 |
|
|
KM02 KT01 |
Boilermaker Trade Related Tools and Equipment |
2.50 |
|
|
|
KM02 KT02 |
Trade related machines and machine operations |
3.00 |
|
|
|
KM02 KT04 |
Materials used in fabrication |
2.50 |
|
|
|
PM02 PS01 |
Maintain hand tools |
1.88 |
|
|
|
PM02 PS02 |
Maintain power tools |
1.88 |
|
|
|
PM02 PS04 |
Maintain layout and measuring tools |
1.88 |
|
|
|
PM02 PS07 |
Use hand and power tools |
1.88 |
|
|
|
PM02 PS03 |
Maintain stationary machinery |
1.88 |
|
|
|
PM02 PS06 |
Use and maintain access equipment |
1.88 |
|
|
|
PM02 PS08 |
Operate machines |
1.88 |
|
|
|
PM03 PS13 |
Cut material using ironworkers |
2.00 |
|
|
|
PM03 PS02 |
Cut material using shears |
2.00 |
|
|
|
PM03 PS03 |
Cut material using saws |
2.00 |
|
|
|
|
|
|
|
|
4529 |
MODULES |
BASIC LIFTING TECHNIQUES |
16.38 |
10 |
|
|
KM04 KT04 |
Lifting of loads |
2.10 |
|
|
|
KM04 KT05 |
Hoisting, lifting and slinging |
2.10 |
|
|
|
PM05 PS06 |
Apply a variety of basic lifting techniques and rigging hand signals according to OHS Act |
2.55 |
|
|
|
PM05 PS07 |
Prepare and secure a site prior to erecting of components |
2.55 |
|
|
|
PM05 PS08 |
Determine weights |
2.55 |
|
|
|
PM05 PS09 |
Sling loads |
2.55 |
|
|
|
PM03 PS09 |
Handle materials and work pieces |
2.00 |
|
|
|
|
|
|
|
|
4775 |
Boilermaker– Selected Modules |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: BOILERMAKER.
SAQA QUAL ID: 93626
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4525 |
651203000 |
BOILERMAKER ARTISAN APPRENTICE YEAR 2 |
69.48 |
65 |
|
|
|
|
|
|
|
4530 |
MODULES |
BOILERMAKER DRAWING |
23.40 |
30 |
|
|
KM06 KT01 |
Boilermaker’s drawings |
9.00 |
|
|
|
PM01 PS01 |
Read engineering drawings. |
3.60 |
|
|
|
PM01 PS03 |
Draw and interpret simple plate, pipe and structural steel plate, pipe and structural steel drawings. |
3.60 |
|
|
|
PM01 PS02 |
Compile a material list. |
3.60 |
|
|
|
PM01 PS04 |
Construct developments. |
3.60 |
|
|
|
|
|
|
|
|
4531 |
MODULES |
METAL WELDING |
17.00 |
15 |
|
|
KM05 KT04 |
Gas, Arc, TIG, MIG Welding processes for flat welding |
3.00 |
|
|
|
KM05 KT05 |
Gas, Arc, TIG, MIG welding in a down hand position |
2.00 |
|
|
|
KM05 KT06 |
Arc welding in all positions |
2.00 |
|
|
|
PM03 PS04 |
Prepare joints |
2.00 |
|
|
|
PM03 PS05 |
Apply heat prior to tack welding |
2.00 |
|
|
|
PM03 PS14 |
Perform tack welding |
2.00 |
|
|
|
PM03 PS10 |
Welding Using Arc Welding Method |
2.00 |
|
|
|
PM03 PS08 |
Weld using wire-feed processes (MIG & TIG) |
2.00 |
|
|
|
|
|
|
|
|
4532 |
MODULES |
GAS CUTTING |
8.88 |
10 |
|
|
KM05 KT07 |
Oxy fuel cutting |
1.60 |
|
|
|
KM05 KT08 |
Automated machine cutting |
1.40 |
|
|
|
PM02 PS05 |
Maintain cutting and welding equipment |
1.88 |
|
|
|
PM03 PS11 |
Weld using the oxy-fuel gas welding and brazing method |
2.00 |
|
|
|
PM03 PS12 |
Apply gas cutting and heating |
2.00 |
|
|
|
|
|
|
|
|
4533 |
MODULES |
HEAT TREATMENT |
20.20 |
10 |
|
|
KM05 KT02 |
Heat Treatment |
3.00 |
|
|
|
KM05 KT01 |
Thermal application |
2.00 |
|
|
|
KM05 KT03 |
Distortions |
3.00 |
|
|
|
PM03 PS06 |
Minimize welding distortions |
2.00 |
|
|
|
PM03 PS07 |
Correct welding distortions |
2.00 |
|
|
|
PM04 PS05 |
Applies heat for forming. |
8.20 |
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: BOILERMAKER.
SAQA QUAL ID: 93626
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4526 |
651203000 |
BOILERMAKER ARTISAN APPRENTICE YEAR 3 |
93.02 |
68.00 |
|
|
|
|
|
|
|
4534 |
MODULES |
TEMPLATES |
7.97 |
5 |
|
|
KM03 KT01 |
Basic Templates |
2.07 |
|
|
|
KM03 KT02 |
Pipe and plate templates |
1.15 |
|
|
|
KM03 KT03 |
Templates for complex components and structures |
1.15 |
|
|
|
PM01 PS05 |
Mark-off materials and parts and make templates. |
3.60 |
|
|
|
|
|
|
|
|
4535 |
MODULES |
PIPE WORK |
8.97 |
5 |
|
|
KM03 KT09 |
Marking off pipe work |
3.45 |
|
|
|
KM03 KT08 |
Pipe work characteristics |
3.45 |
|
|
|
KM03 KT07 |
Simple pipe work component fabrication. |
2.07 |
|
|
|
|
|
|
|
|
4536 |
MODULES |
FORMING & SHAPING |
42.46 |
30 |
|
|
KM03 KT04 |
Forming and shaping simple components |
2.07 |
|
|
|
KM03 KT05 |
Fabrication using various structural steel shapes |
3.45 |
|
|
|
KM03 KT06 |
Forming and shaping complex components |
4.14 |
|
|
|
PM04 PS01 |
Form material using rollers. |
8.20 |
|
|
|
PM04 PS02 |
Form material using benders. |
8.20 |
|
|
|
PM04 PS03 |
Fabricate components, sub-components and structures applying various methods. |
8.20 |
|
|
|
PM04 PS04 |
Fabricate pipe sections. |
8.20 |
|
|
|
|
|
|
|
|
4537 |
MODULES |
JOINING, ERECTING & FASTENING |
27.62 |
20 |
|
|
KM04 KT01 |
Joining of simple components. |
2.10 |
|
|
|
KM04 KT02 |
Joining of steel structures |
3.50 |
|
|
|
KM04 KT03 |
Joining of complex assemblies |
4.20 |
|
|
|
PM05 PS01 |
Check sub-components and components |
2.55 |
|
|
|
PM05 PS02 |
Position and join sub-components and components in accordance to assembly drawings |
2.55 |
|
|
|
PM05 PS03 |
Set fabricated component in place |
2.55 |
|
|
|
PM05 PS04 |
Assemble and mechanically join sheet, plate, tube, pipe and steel sections |
2.55 |
|
|
|
PM05 PS05 |
Fasten components as required by the applied drawing specifications, (bolting, riveting and / welding) |
2.55 |
|
|
|
PM05 PS10 |
Erect and assemble pipes and steel structures |
2.55 |
|
|
|
PM05 PS11 |
Check completed assembly and erected structure for compliance as per final assembly drawing. |
2.55 |
|
|
|
|
|
|
|
|
4538 |
MODULES |
PLASMA CUTTING with CNC. Laser & Water Jet Cutting information |
6.00 |
8 |
|
|
KM05 KT09 |
Plasma cutting |
1.00 |
|
|
|
PM03 PS01 |
Cut material using plasma cutting equipment |
2.00 |
|
|
|
KM02 KT03 |
Computer numerical control (CNC) applications |
2.00 |
|
|
|
KM05 KT10 |
Laser jet and water jet cutting |
1.00 |
|
|
ELECTRICIAN |
|
|
||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4625 |
671101000 |
ELECTRICIAN ARTISAN APPRENTICE YEAR 1 |
67.67 |
50 |
|
4626 |
671101000 |
ELECTRICIAN ARTISAN APPRENTICE YEAR 2 |
96.09 |
65 |
|
4627 |
671101000 |
ELECTRICIAN ARTISAN APPRENTICE YEAR 3 |
40.22 |
30 |
|
|
|
TOTALS: |
203.98 |
145 |
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: ELECTRICIAN
SAQA QUAL ID: 91761
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4625 |
671101000 |
ELECTRICIAN ARTISAN APPRENTICE YEAR 1 |
67.67 |
50 |
|
|
|
|
|
|
|
4628 |
MODULES |
INDUCTION AND SAFETY |
10.32 |
10 |
|
|
KM01 KT01 |
Safety, health, environment, risk and quality principles in the workplace |
5.00 |
|
|
|
PM02 PS01 |
Undertake risk assessment in accordance with all statutory requirements |
1.66 |
|
|
|
PM02 PS03 |
Plan the worksite set-up |
1.66 |
|
|
|
PM03 PS02 |
Prepare and transport resources |
1.00 |
|
|
|
PM03 PS01 |
Procure resources |
1.00 |
|
|
|
|
|
|
|
|
4629 |
MODULES |
HAND AND POWER TOOLS |
12.32 |
15 |
|
|
KM02 KT01 |
Hand tools and power tools |
4.00 |
|
|
|
PM03 PS03 |
Prepare work site, equipment, tools, consumables and materials |
1.00 |
|
|
|
PM01 PS01 |
Select, use and care of engineering hand tools |
3.66 |
|
|
|
PM01 PS02 |
Select, use and care for power tools |
3.66 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4630 |
MODULES |
ARC WELDING AND GAS CUTTING |
7.32 |
10 |
|
|
PM01 PS05 |
Carry out basic electric arc welding in an electrical environment |
3.66 |
|
|
|
PM01 PS06 |
Carry out basic gas cutting in an electrical environment |
3.66 |
|
|
|
|
|
|
|
|
4631 |
MODULES |
FUNDAMENTAL AND DRAWINGS |
8.22 |
5 |
|
|
KM04 KT01 |
Introduction to the world of work and the electrical trade |
2.00 |
|
|
|
KM03 KT01 |
Fundamentals of electricity |
4.55 |
|
|
|
PM02 PS02 |
Read and interpret electrical drawings |
1.67 |
|
|
|
|
|
|
|
|
4632 |
MODULES |
SUPPLY SYSTEMS |
15.50 |
5 |
|
|
KM07 KT01 |
Concepts, theories and principles of supply Systems |
6.20 |
|
|
|
KM07 KT03 |
Transformers |
6.20 |
|
|
|
KM07 KT02 |
Batteries |
3.10 |
|
|
|
|
|
|
|
|
4633 |
MODULES |
ELECTRICAL EQUIPMENT |
13.99 |
5 |
|
|
KM03 KT03 |
Electrical principles of appliances |
4.55 |
|
|
|
KM07 KT06 |
Lighting systems |
3.10 |
|
|
|
PM05 PS05 |
Wire electrical equipment and control systems |
6.34 |
|
|
4767 |
Electrician– Selected Modules |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: ELECTRICIAN
SAQA QUAL ID: 91761
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4626 |
671101000 |
ELECTRICIAN ARTISAN APPRENTICE YEAR 2 |
96.09 |
65 |
|
|
|
|
|
|
|
4634 |
MODULES |
WIRING |
40.02 |
30 |
|
|
KM05 KT01 |
Wire ways |
3.85 |
|
|
|
KM05 KT02 |
Wiring of installations |
3.85 |
|
|
|
KM05 KT03 |
Earthing and bonding |
3.30 |
|
|
|
KM08 KT01 |
Low voltage protection |
5.00 |
|
|
|
PM04 PS01 |
Confirm the selection and installation method of the selected wire ways |
1.67 |
|
|
|
PM04 PS02 |
Use installation tools and equipment |
1.67 |
|
|
|
PM04 PS03 |
Design and install wire ways |
1.67 |
|
|
|
PM05 PS01 |
Identify hazards within the installation |
6.34 |
|
|
|
PM05 PS02 |
Confirm the selection and installation method of the electrical equipment and control systems |
6.34 |
|
|
|
PM05 PS03 |
Use installation tools and personal protective equipment |
6.34 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4635 |
MODULES |
CONDUCTORS AND CABLES |
12.54 |
5 |
|
|
KM07 KT04 |
Types of cables and applications |
6.20 |
|
|
|
PM05 PS06 |
Terminate and connect cables and conductors |
6.34 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4636 |
MODULES |
MOTORS |
43.53 |
30 |
|
|
KM06 KT01 |
Rotating electrical machinery- AC motors |
4.55 |
|
|
|
KM06 KT02 |
Rotating Electrical Machinery- DC motors |
4.55 |
|
|
|
KM06 KT03 |
Rotating electrical machinery – Alternators and Generators |
3.90 |
|
|
|
KM07 KT05 |
Switchgear and control gear |
6.20 |
|
|
|
PM05 PS04 |
Install equipment and control systems |
6.34 |
|
|
|
PM06 PS01 |
Inspect electrical equipment, control systems and installations under power off conditions |
2.50 |
|
|
|
PM06 PS02 |
Test electrical equipment, control systems and installations under power off conditions |
2.5 |
|
|
|
PM07 PS01 |
Carry out commissioning tests (with power on) on electrical installations and control systems |
4.33 |
|
|
|
PM07 PS02 |
Rectify defects found on electrical installations and control systems |
4.33 |
|
|
|
PM07 PS03 |
Report product deficiencies and rectify workmanship |
4.33 |
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: ELECTRICIAN
SAQA QUAL ID: 91761
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4627 |
671101000 |
ELECTRICIAN ARTISAN APPRENTICE YEAR 3 |
40.22 |
30 |
|
|
|
|
|
|
|
4637 |
MODULES |
MEASURING AND TESTING |
12.06 |
10 |
|
|
KM02 KT02 |
Measuring and testing instruments |
4.00 |
|
|
|
PM01 PS03 |
Select, use and care for electrical measuring instruments |
3.66 |
|
|
|
PM08 PS02 |
Select tools and testing instruments |
4.40 |
|
|
|
|
|
|
|
|
4638 |
MODULES |
ELECTRONICS |
7.56 |
10 |
|
|
KM03 KT02 |
Electronics |
3.90 |
|
|
|
PM01 PS04 |
Perform soldering activities |
3.66 |
|
|
|
|
|
|
|
|
4639 |
MODULES |
FAULT FINDING |
20.60 |
10 |
|
|
KM09 KT01 |
Fault finding |
3.00 |
|
|
|
PM08 PS01 |
Obtain work instructions and gather drawings and documentation |
4.40 |
|
|
|
PM08 PS03 |
Carry out fault finding |
4.40 |
|
|
|
PM08 PS04 |
Rectify faults where applicable |
4.40 |
|
|
|
PM08 PS05 |
Record findings and provide feedback |
4.40 |
|
ADDITIONAL MODULES:
The following modules below are not included in the QCTO Modular Curriculum for an Electrician,
The modules below are listed due to client demand:
|
4790 |
MODULES |
ELECTRONICS |
13.68 |
10 |
|
|
PM07 PS01 |
Read and interpret electronic diagrams |
1.67 |
|
|
|
PM07 PS02 |
Identify and use electronic measuring instruments |
1.67 |
|
|
|
PM07 PS03 |
Identify and test electronic components |
1.67 |
|
|
|
PM07 PS04 |
Construct electronic circuits using soldering |
1.67 |
|
|
|
PM12 PS03 |
Find faults on electronic circuits |
3.50 |
|
|
|
PM12 PS04 |
Replace defective electronic components |
3.50 |
|
|
|
|
|
|
|
|
4651 |
MODULES |
PROGRAMMABLE LOGIC CONTROLLERS |
1.67 |
10 |
|
|
PM07 PS05 |
Install, connect and programme programmable logic controllers |
1.67 |
|
|
|
|
|
|
|
|
4652 |
MODULES |
VARIABLE SPEED DRIVES |
1.67 |
3 |
|
|
PM07 PS06 |
Install, connect and programme variable speed drives |
1.67 |
|
|
MECHANICAL FITTER |
|
|
||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4559 |
653303000 |
MECHANICAL FITTER ARTISAN APPRENTICE TRAINING YEAR 1 |
46.54 |
60 |
|
4560 |
653303000 |
MECHANICAL FITTER ARTISAN APPRENTICE TRAINING YEAR 2 |
37.55 |
30 |
|
4561 |
653303000 |
MECHANICAL FITTER ARTISAN APPRENTICE TRAINING YEAR 3 |
62.59 |
35 |
|
|
|
TOTALS: |
146.68 |
125 |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MECHANICAL FITTER
SAQA QUAL ID: 94021
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4559 |
653303000 |
MECHANICAL FITTER ARTISAN APPRENTICE YEAR 1 |
46.54 |
60 |
|
|
|
|
|
|
|
4562 |
MODULES |
INDUCTION AND SAFETY |
8.00 |
5 |
|
|
KM01-KT01 |
Introduction to the Fitting Trade |
1.60 |
|
|
|
KM01-KT02 |
Workplace health, safety and environmental protection |
6.40 |
|
|
|
|
|
|
|
|
4563 |
MODULES |
DRAWINGS |
3.70 |
5 |
|
|
FT-TH02-MO1 |
Engineering drawings |
|
|
|
|
KM01-KT03 |
Engineering drawings |
3.20 |
|
|
|
PM01-PS04 |
Read, interpret and produce basic engineering drawings |
0.50 |
|
|
|
|
|
|
|
|
4564 |
MODULES |
MATERIALS |
3.70 |
3 |
|
|
FT-TH02-MO2 |
Engineering materials |
|
|
|
|
KM01 KT04 |
Engineering materials |
3.20 |
|
|
|
PM01 PS05 |
Identify engineering materials, their characteristics and applications |
0.50 |
|
|
|
|
|
|
|
|
4565 |
MODULES |
ENGINEERING TOOLS AND EQUIPMENT |
12.82 |
20 |
|
|
FT-TH02-MO3 |
Engineering tools and equipment |
|
|
|
|
KM01 KT05 |
Engineering tools and equipment |
4.80 |
|
|
|
PM01 PS03 |
Select and care for engineering measuring instruments |
0.50 |
|
|
|
FT-TH03-M03 |
Operate a Mechanical Saw |
|
|
|
|
PM02 PS09 |
Saw material to specification using a power saw |
0.67 |
|
|
|
FT-TH03-M02 |
Perform Drilling Operations |
|
|
|
|
PM01 PS01 |
Plan and prepare for fabrication of component |
0.50 |
|
|
|
PM01 PS02 |
Select and care for engineering hand tools |
0.50 |
|
|
|
PM02 PS02 |
Select and care for engineering machines |
0.67 |
|
|
|
PM02 PS01 |
Select and care for engineering power tools |
0.67 |
|
|
|
PM01 PS06 |
Mark-off various simple components |
0.50 |
|
|
|
PM01 PS11 |
Cut threads with stocks, dies and taps |
0.50 |
|
|
|
PM01 PS09 |
Saw work piece |
0.50 |
|
|
|
PM01 PS08 |
File work a piece |
0.50 |
|
|
|
FT-TH03-M01 |
Perform Grinding Operations |
|
|
|
|
PM02 PS03 |
Grind material to specifications using a pedestal grinder |
0.67 |
|
|
|
PM02 PS04 |
Drill material to specifications using a portable drilling machine |
0.67 |
|
|
|
PM02 PS05 |
Drill material to specifications using a fixed drilling machine |
0.67 |
|
|
|
PM01 PS12 |
Ream parallel and tapered holes |
0.50 |
|
|
|
|
|
|
|
|
4566 |
MODULES |
KEYS AND LOCKING DEVICES |
10.44 |
10 |
|
|
FT-TH05-M01 |
Fasteners Locking Devices, Seals and Gaskets |
|
|
|
|
KM01 KT07 |
Types and Application of Screw Threads |
3.20 |
|
|
|
KM01 KT08 |
Types and function of locking devices and fasteners |
3.20 |
|
|
|
PM01 PS10 |
Fabricate and fit a key |
0.50 |
|
|
|
KM02 KT01 |
Static and dynamic seals and gaskets |
3.04 |
|
|
|
PM01 PS07 |
Fabricate and fit a gasket |
0.50 |
|
|
|
|
|
|
|
|
4567 |
MODULES |
BASIC LIFTING CONCEPTS |
3.20 |
2 |
|
|
FT-TH04-M01 |
Lifting Concepts |
|
|
|
|
KM01 KT06 |
Basic lifting concepts |
3.20 |
|
|
|
|
|
|
|
|
4568 |
MODULES |
ARC WELDING AND GAS WELDING & CUTTING |
5.20 |
15 |
|
|
FT-TH03-M01 |
Arc Welding |
|
|
|
|
KM01 KT09 |
Principles, equipment and methods of arc welding, gas cutting, brazing and silver soldering |
3.20 |
|
|
|
PM02 PS06 |
Arc weld metal to specification |
0.67 |
|
|
|
FT-TH03-M02 |
Gas Welding |
|
|
|
|
PM02 PS07 |
Gas weld, silver solder and braze metal to specification |
0.67 |
|
|
|
FT-TH03-M03 |
Gas Cutting |
|
|
|
|
PM02 PS08 |
Gas cut metal to specification |
0.67 |
|
|
|
|
|
|
|
|
4770 |
Mechanical Fitter– Selected Modules |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MECHANICAL FITTER
SAQA QUAL ID: 94021
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4560 |
653303000 |
MECHANICAL FITTER ARTISAN APPRENTICE YEAR 2 |
37.55 |
30 |
|
|
|
|
|
|
|
4569 |
MODULES |
Lubrication system |
8.52 |
5 |
|
|
FT-TH07-M08 |
Lubrication System |
|
|
|
|
KM02 KT09 |
Mechanical working principles, types and applications of lubrication Systems |
3.04 |
|
|
|
PM03 PS08 |
Clean and inspect a Lubrication system |
0.55 |
|
|
|
PM04 PS07 |
Replace Lubrication components and assemble a Lubrication system |
0.60 |
|
|
|
PM05 PS07 |
Do fault finding on a Lubrication system |
1.50 |
|
|
|
PM06 PS06 |
Repair a Lubrication system |
1.50 |
|
|
|
PM07 PS06 |
Install lubrication system components and commission Lubrication systems |
1.33 |
|
|
|
|
|
|
|
|
4572 |
MODULES |
Conveyors and Drives |
10.80 |
10 |
|
|
FT-TH07 -M03 |
Drives |
|
|
|
|
FT-TH07 -M11 |
Conveyors |
|
|
|
|
KM02 KT12 |
Types and functions of conveyors |
2.28 |
|
|
|
KM02 KT04 |
Types and application of drives |
3.04 |
|
|
|
PM03 PS06 |
Disassemble, clean and inspect Drive |
0.55 |
|
|
|
PM04 PS05 |
Replace Drive components and assemble a Drive |
0.60 |
|
|
|
PM05 PS05 |
Do fault finding on a Drive |
1.50 |
|
|
|
PM06 PS05 |
Repair a Drive |
1.50 |
|
|
|
PM07 PS05 |
Install and commission Drive |
1.33 |
|
|
|
|
|
|
|
|
4573 |
MODULES |
Bearings |
5.52 |
5 |
|
|
FT-TH07 -M01 |
Bearings |
|
|
|
|
KM02 KT02 |
Types, and application of Bearings |
3.04 |
|
|
|
PM03 PS07 |
Remove and inspect Bearing |
0.55 |
|
|
|
PM04 PS06 |
Replace Bearings |
0.60 |
|
|
|
PM05 PS06 |
Do fault finding on a Bearing |
1.33 |
|
|
|
|
|
|
|
|
4574 |
MODULES |
Hydraulics |
8.52 |
5 |
|
|
FT-TH07 -M09 |
Hydraulic Systems |
|
|
|
|
KM02 KT10 |
Mechanical working principles, types and applications of hydraulic |
3.04 |
|
|
|
PM03 PS09 |
Clean and inspect a Hydraulic system |
0.55 |
|
|
|
PM04 PS08 |
Replace Hydraulic components and assemble a Hydraulic system |
0.60 |
|
|
|
PM05 PS08 |
Do fault finding on a Hydraulic system |
1.33 |
|
|
|
PM06 PS07 |
Repair a Hydraulic system |
1.50 |
|
|
|
PM07 PS07 |
Install hydraulic system components and commission Hydraulic systems |
1.50 |
|
|
|
|
|
|
|
|
4575 |
MODULES |
Valves |
4.19 |
5 |
|
|
FT-TH07 -M02 |
Valves |
|
|
|
|
KM02 KT03 |
Types and application of valves |
3.04 |
|
|
|
PM03 PS11 |
Disassemble, clean and inspect a Valve |
0.55 |
|
|
|
PM04 PS10 |
Replace Valve components and assemble a Valve |
0.60 |
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MECHANICAL FITTER
SAQA QUAL ID: 94021
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4561 |
653303000 |
MECHANICAL FITTER ARTISAN APPRENTICE TRAINING YEAR 3 |
62.59 |
35 |
|
|
|
|
|
|
|
4576 |
MODULES |
PUMPS |
15.19 |
5 |
|
|
FT-TH07-M04 |
Pumps |
|
|
|
|
KM02 KT05 |
Types and application of pumps |
3.04 |
|
|
|
PM03 PS03 |
Disassemble, clean and inspect Pump |
0.55 |
|
|
|
PM04 PS02 |
Replace gearbox components and assemble a Pump |
0.60 |
|
|
|
PM05 PS02 |
Do fault finding on a Pump |
1.33 |
|
|
|
PM06 PS02 |
Repair a Pump |
1.50 |
|
|
|
PM07 PS02 |
Install and commission Pump |
1.50 |
|
|
|
PM08 PS02 |
Overhaul a Pump |
6.67 |
|
|
|
|
|
|
|
|
4577 |
MODULES |
CLUTCHES |
8.52 |
5 |
|
|
FT-TH07-M06 |
Clutches |
|
|
|
|
KM02 KT07 |
Mechanical working principles, types and applications of clutches |
3.04 |
|
|
|
PM03 PS05 |
Disassemble, clean and inspect Clutch |
0.55 |
|
|
|
PM04 PS04 |
Replace Clutch components and assemble a Clutch |
0.60 |
|
|
|
PM05 PS04 |
Do fault finding on a Clutch |
1.33 |
|
|
|
PM06 PS04 |
Repair a Clutch |
1.50 |
|
|
|
PM07 PS04 |
Install and commission Clutch |
1.50 |
|
|
|
|
|
|
|
|
4578 |
MODULES |
BRAKES |
8.52 |
5 |
|
|
FT-TH07-M07 |
Brakes |
|
|
|
|
KM02 KT08 |
Mechanical working principles, types and applications of brakes |
3.04 |
|
|
|
PM03 PS04 |
Disassemble, clean and inspect Brake |
0.55 |
|
|
|
PM04 PS03 |
Replace brake components and assemble a Brake |
0.60 |
|
|
|
PM05 PS03 |
Do fault finding on a Brake |
1.33 |
|
|
|
PM06 PS03 |
Repair a Brake |
1.50 |
|
|
|
PM07 PS03 |
Install and commission |
1.50 |
|
|
|
|
|
|
|
|
4579 |
MODULES |
GEARBOXES |
15.19 |
10 |
|
|
FT-TH07-M05 |
Gearboxes |
|
|
|
|
KM02 KT06 |
Mechanical working principles, types and applications of reduction gearboxes |
3.04 |
|
|
|
KM02 KT13 |
Diagnostic techniques |
2.28 |
|
|
|
PM03 PS01 |
Plan and prepare disassembly of sub-assemblies |
0.55 |
|
|
|
PM03 PS02 |
Disassemble, clean and inspect gearbox |
0.55 |
|
|
|
PM04 PS01 |
Replace gearbox components and assemble a Gearbox |
0.60 |
|
|
|
PM05 PS01 |
Do fault finding on a Gearbox |
1.33 |
|
|
|
PM06 PS01 |
Repair a Gearbox |
1.50 |
|
|
|
PM07 PS01 |
Install and commission Gearbox |
1.50 |
|
|
|
PM08 PS01 |
Overhaul a Gearbox |
6.67 |
|
|
|
|
|
|
|
|
4580 |
MODULES |
PNEUMATICS |
15.19 |
10 |
|
|
FT-TH07-M010 |
Pneumatics |
|
|
|
|
KM02 KT11 |
Mechanical working principles, types and applications of pneumatic |
3.04 |
|
|
|
PM03 PS10 |
Clean and inspect a Pneumatic system |
0.55 |
|
|
|
PM04 PS09 |
Replace Pneumatic components and assemble a Pneumatic system |
0.60 |
|
|
|
PM05 PS09 |
Do fault finding on a Pneumatic system |
1.33 |
|
|
|
PM06 PS08 |
Repair a Pneumatic system |
1.50 |
|
|
|
PM07 PS08 |
Install pneumatic system components and commission Pneumatic systems |
1.50 |
|
|
|
PM08 PS03 |
Overhaul a mechanical machine that incorporates a hydraulic and Pneumatic System |
6.67 |
|
|
FITTER AND TURNER |
|
|
||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4581 |
652302000 |
FITTER AND TURNER ARTISAN APPRENTICE TRAINING YEAR 1 |
52.43 |
60 |
|
4582 |
652302000 |
FITTER AND TURNER ARTISAN APPRENTICE TRAINING YEAR 2 |
74.95 |
60 |
|
4583 |
652302000 |
FITTER AND TURNER ARTISAN APPRENTICE TRAINING YEAR 3 |
90.59 |
75 |
|
|
|
TOTALS: |
217.97 |
195 |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: FITTER AND TURNER
SAQA QUAL ID: 94020
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4581
|
652302000 |
FITTER AND TURNER ARTISAN APPRENTICE YEAR 1 |
52.43 |
60.00 |
|
|
|
|
|
|
|
4584 |
MODULES |
INDUCTION AND SAFETY |
8.00 |
5 |
|
|
FT-TH01-MO1 |
Introduction to the Fitting and Turning Trade |
|
|
|
|
KM01-KT01 |
Introduction to the Fitting and Turning Trade |
1.60 |
|
|
|
KM01-KT02 |
Workplace health, safety and environmental protection |
6.40 |
|
|
|
|
|
|
|
|
4585 |
MODULES |
DRAWINGS |
3.70 |
5 |
|
|
FT-TH02-MO1 |
Engineering drawings |
|
|
|
|
KM01-KT03 |
Engineering drawings |
3.20 |
|
|
|
PM01 PS03 |
Select and care for engineering measuring instruments |
0.50 |
|
|
|
PM01-PS04 |
Read, interpret and produce basic engineering drawings |
0.50 |
|
|
|
|
|
|
|
|
4586 |
MODULES |
MATERIALS |
3.70 |
3 |
|
|
FT-TH02-MO2 |
Engineering materials |
|
|
|
|
KM01 KT04 |
Engineering materials |
3.20 |
|
|
|
PM01 PS05 |
Identify engineering materials, their characteristics and applications |
0.50 |
|
|
|
|
|
|
|
|
4589 |
MODULES |
ENGINEERING TOOLS AND EQUIPMENT |
24.92 |
20 |
|
|
FT-TH02-M03 |
Engineering tools and equipment |
|
|
|
|
KM01 KT05 |
Engineering tools and equipment |
4.80 |
|
|
|
KM03 KT04 |
Types and working principles of pedestal grinding machine |
3.60 |
|
|
|
FT-TH03-M01 |
Perform Grinding Operations |
|
|
|
|
KM03 KT05 |
Principles, methods and techniques of machining work pieces with surface and cylindrical grinding machines |
9.00 |
|
|
|
FT-TH03-M03 |
Operate a Mechanical Saw |
|
|
|
|
PM02 PS09 |
Saw material to specification using a mechanical saw |
0.67 |
|
|
|
FT-TH03-M02 |
Perform Drilling Operations |
|
|
|
|
PM01 PS01 |
Plan and prepare for fabrication of component |
0.50 |
|
|
|
PM01 PS02 |
Select and care for engineering hand tools |
0.50 |
|
|
|
PM01 PS08 |
File work a piece |
0.50 |
|
|
|
PM01 PS09 |
Saw work piece |
0.50 |
|
|
|
PM01 PS11 |
Cut threads with stocks, dies and taps |
0.50 |
|
|
|
PM01 PS12 |
Ream parallel and tapered holes |
0.50 |
|
|
|
PM01 PS06 |
Mark-off various simple components |
0.50 |
|
|
|
PM02 PS01 |
Select and care for engineering power tools |
0.67 |
|
|
|
PM02 PS02 |
Select and care for engineering machines |
0.67 |
|
|
|
PM02 PS03 |
Grind material to specifications using a pedestal grinder |
0.67 |
|
|
|
PM02 PS04 |
Drill material to specifications using a portable drilling machine |
0.67 |
|
|
|
PM02 PS05 |
Drill material to specifications using a fixed drilling machine |
0.67 |
|
|
|
|
|
|
|
|
4590 |
MODULES |
KEYS AND LOCKING DEVICES |
3.70 |
10 |
|
|
FT-TH05-M01 |
Fasteners Locking Devices,Seals and Gaskets |
|
|
|
|
KM01 KT07 |
Types and Application of Screw Threads |
3.20 |
|
|
|
KM01 KT08 |
Types and function of locking devices and fasteners |
3.20 |
|
|
|
PM01 PS10 |
Fabricate and fit a key |
0.50 |
|
|
|
KM02 KT01 |
Static and dynamic seals and gaskets |
3.04 |
|
|
|
PM01 PS07 |
Fabricate and fit a gasket |
0.50 |
|
|
4587 |
MODULES |
BASIC LIFTING CONCEPTS |
3.20 |
2 |
|
|
FT-TH04-M01 |
Lifting Concepts |
|
|
|
|
KM01 KT06 |
Basic lifting concepts |
3.20 |
|
|
|
|
|
|
|
|
4588 |
MODULES |
ARC WELDING, GAS WELDING AND CUTTING |
5.21 |
15 |
|
|
FT-TH03-M01 |
Arc Welding |
|
|
|
|
KM01 KT09 |
Principles, equipment and methods of arc welding, gas cutting, brazing and silver soldering |
3.20 |
|
|
|
PM02 PS06 |
Arc weld metal to specification |
0.67 |
|
|
|
FT-TH03-M02 |
Gas Welding |
|
|
|
|
PM02 PS07 |
Gas weld, silver solder and braze metal to specification |
0.67 |
|
|
|
FT-TH03-M03 |
Gas Cutting |
|
|
|
|
PM02 PS08 |
Gas cut metal to specification |
0.67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4791 |
Fitter and Turner– Selected Modules |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: FITTER AND TURNER
SAQA QUAL ID: 94020
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4582 |
652302000 |
FITTER AND TURNER ARTISAN APPRENTICE YEAR 2 |
74.95 |
60 |
|
|
|
|
|
|
|
4591 |
MODULES |
Lubrication system |
8.52 |
5 |
|
|
FT-TH07-M08 |
Lubrication System |
|
|
|
|
KM02 KT09 |
Mechanical working principles, types and applications of lubrication Sytems |
3.04 |
|
|
|
PM03 PS08 |
Clean and inspect a Lubrication system |
0.55 |
|
|
|
PM04 PS07 |
Replace Lubrication components and assemble a Lubrication system |
0.60 |
|
|
|
PM05 PS07 |
Do fault finding on a Lubrication system |
1.50 |
|
|
|
PM06 PS06 |
Repair a Lubrication system |
1.50 |
|
|
|
PM07 PS06 |
Install lubrication system components and commission Lubrication systems |
1.33 |
|
|
|
|
|
|
|
|
4594 |
MODULES |
Conveyors and Drives |
10.80 |
10 |
|
|
FT-TH07 -M03 |
Drives |
|
|
|
|
FT-TH07 -M11 |
Conveyors |
|
|
|
|
KM02 KT12 |
Types and functions of conveyors |
2.28 |
|
|
|
KM02 KT04 |
Types and application of drives |
3.04 |
|
|
|
PM03 PS06 |
Disassemble, clean and inspect Drive |
0.55 |
|
|
|
PM04 PS05 |
Replace Drive components and assemble a Drive |
0.60 |
|
|
|
PM05 PS05 |
Do fault finding on a Drive |
1.50 |
|
|
|
PM06 PS05 |
Repair a Drive |
1.50 |
|
|
|
PM07 PS05 |
Install and commission Drive |
1.33 |
|
|
|
|
|
|
|
|
4595 |
MODULES |
Bearings |
5.52 |
5 |
|
|
FT-TH07 -M01 |
Bearings |
|
|
|
|
KM02 KT02 |
Types, and application of Bearings |
3.04 |
|
|
|
PM03 PS07 |
Remove and inspect Bearing |
0.55 |
|
|
|
PM04 PS06 |
Replace Bearings |
0.60 |
|
|
|
PM05 PS06 |
Do fault finding on a Bearing |
1.33 |
|
|
|
|
|
|
|
|
4596 |
MODULES |
Hydraulics |
8.52 |
5 |
|
|
FT-TH07 -M09 |
Hydraulic Systems |
|
|
|
|
KM02 KT10 |
Mechanical working principles, types and applications of hydraulic |
3.04 |
|
|
|
PM03 PS09 |
Clean and inspect a Hydraulic system |
0.55 |
|
|
|
PM04 PS08 |
Replace Hydraulic components and assemble a Hydraulic system |
0.60 |
|
|
|
PM05 PS08 |
Do fault finding on a Hydraulic system |
1.33 |
|
|
|
PM06 PS07 |
Repair a Hydraulic system |
1.50 |
|
|
|
PM07 PS07 |
Install hydraulic system components and commission Hydraulic systems |
1.50 |
|
|
|
|
|
|
|
|
4597 |
MODULES |
Valves |
4.19 |
5 |
|
|
FT-TH07 -M02 |
Valves |
|
|
|
|
KM02 KT03 |
Types and application of valves |
3.04 |
|
|
|
PM03 PS11 |
Disassemble, clean and inspect a Valve |
0.55 |
|
|
|
PM04 PS10 |
Replace Valve components and assemble a Valve |
0.60 |
|
|
|
|
|
|
|
|
4598 |
MODULES |
Milling Machine 1 |
12.33 |
10 |
|
|
FT-TH08-M04 |
Operate a milling machine to produce simple components |
|
|
|
|
FT-TH08-M05 |
Operate a milling machine to produce components of intermediate complexity |
|
|
|
|
KM03 KT03 |
Principles, methods and techniques of machining work pieces with a milling machine |
9.00 |
|
|
|
PM09 PS02 |
Set up and operate a convention milling machine to debur, centre drill, chamfer and counter bore a work piece |
0.67 |
|
|
|
PM09 PS09 |
Produce external keyways on a conventional milling machine |
0.67 |
|
|
|
PM10 PS06 |
Machine a square on a conventional milling machine |
2.00 |
|
|
4599 |
MODULES |
Centre Lathe 1 |
25.07 |
20 |
|
|
FT-TH08-M01 |
Operate a centre lathe to produce simple components |
|
|
|
|
FT-TH08-M02 |
Operate a centre lathe to produce components of intermediate complexity |
|
|
|
|
KM03 KT01 |
Principles, methods and techniques of fabrication |
3.60 |
|
|
|
KM03 KT02 |
Principles, methods and techniques of machining work pieces with a centre |
10.80 |
|
|
|
PM09 PS01 |
Set up and operate a centre lathe to deburr, centre drill, chamfer and counter bore a work piece |
0.67 |
|
|
|
PM09 PS03 |
Perform drilling on a centre lathe |
0.67 |
|
|
|
PM09 PS04 |
Perform tapping and reaming on a centre lathe |
0.67 |
|
|
|
PM09 PS07 |
Produce parallel and tapered work pieces on a centre lathe |
0.67 |
|
|
|
PM09 PS06 |
Perform grooving and knurling on a centre lathe |
0.67 |
|
|
|
PM09 PS05 |
Perform parting on a centre lathe |
0.67 |
|
|
|
PM10 PS03 |
Machine bushes on a centre lathe |
2.00 |
|
|
|
PM09 PS08 |
Turn an internal radius on a centre lathe |
0.67 |
|
|
|
PM10 PS01 |
Machine external and internal tapers on a centre |
2.00 |
|
|
|
PM10 PS05 |
Perform Centre Lathe turning using fixed and running |
2.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: FITTER AND TURNER
SAQA QUAL ID: 94020
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4583 |
652302000 |
FITTER AND TURNER ARTISAN APPRENTICE YEAR 3 |
90.59 |
75 |
|
|
|
|
|
|
|
4600 |
MODULES |
Pumps |
15.19 |
5 |
|
|
FT-TH07-M04 |
Pumps |
|
|
|
|
KM02 KT05 |
Types and application of pumps |
3.04 |
|
|
|
PM03 PS03 |
Disassemble, clean and inspect Pump |
0.55 |
|
|
|
PM04 PS02 |
Replace gearbox components and assemble a Pump |
0.60 |
|
|
|
PM05 PS02 |
Do fault finding on a Pump |
1.33 |
|
|
|
PM06 PS02 |
Repair a Pump |
1.50 |
|
|
|
PM07 PS02 |
Install and commission Pump |
1.50 |
|
|
|
PM08 PS02 |
Overhaul a Pump |
6.67 |
|
|
|
|
|
|
|
|
4601 |
MODULES |
Clutches |
8.52 |
5 |
|
|
FT-TH07-M06 |
Clutches |
|
|
|
|
KM02 KT07 |
Mechanical working principles, types and applications of clutches |
3.04 |
|
|
|
PM03 PS05 |
Disassemble, clean and inspect Clutch |
0.55 |
|
|
|
PM04 PS04 |
Replace Clutch components and assemble a Clutch |
0.60 |
|
|
|
PM05 PS04 |
Do fault finding on a Clutch |
1.33 |
|
|
|
PM06 PS04 |
Repair a Clutch |
1.50 |
|
|
|
PM07 PS04 |
Install and commission Clutch |
1.50 |
|
|
|
|
|
|
|
|
4602 |
MODULES |
Brakes |
8.52 |
5 |
|
|
FT-TH07-M07 |
Brakes |
|
|
|
|
KM02 KT08 |
Mechanical working principles, types and applications of brakes |
3.04 |
|
|
|
PM03 PS04 |
Disassemble, clean and inspect Brake |
0.55 |
|
|
|
PM04 PS03 |
Replace brake components and assemble a Brake |
0.60 |
|
|
|
PM05 PS03 |
Do fault finding on a Brake |
1.33 |
|
|
|
PM06 PS03 |
Repair a Brake |
1.50 |
|
|
|
PM07 PS03 |
Install and commission |
1.50 |
|
|
|
|
|
|
|
|
4603 |
MODULES |
Gearboxes |
15.19 |
10 |
|
|
FT-TH07-M05 |
Gearboxes |
|
|
|
|
KM02 KT06 |
Mechanical working principles, types and applications of reduction gearboxes |
3.04 |
|
|
|
KM04 KT13 |
Diagnostic techniques |
2.28 |
|
|
|
PM03 PS01 |
Plan and prepare disassembly of sub-assemblies |
0.55 |
|
|
|
PM03 PS02 |
Disassemble, clean and inspect gearbox |
0.55 |
|
|
|
PM04 PS01 |
Replace gearbox components and assemble a Gearbox |
0.60 |
|
|
|
PM05 PS01 |
Do fault finding on a Gearbox |
1.33 |
|
|
|
PM06 PS01 |
Repair a Gearbox |
1.50 |
|
|
|
PM07 PS01 |
Install and commission Gearbox |
1.50 |
|
|
|
PM08 PS01 |
Overhaul a Gearbox |
6.67 |
|
|
|
|
|
|
|
|
4604 |
MODULES |
Pneumatics |
15.19 |
10 |
|
|
FT-TH07-M010 |
Pneumatics |
|
|
|
|
KM02 KT11 |
Mechanical working principles, types and applications of pneumatic |
3.04 |
|
|
|
PM03 PS10 |
Clean and inspect a Pneumatic system |
0.55 |
|
|
|
PM04 PS09 |
Replace Pneumatic components and assemble a Pneumatic system |
0.60 |
|
|
|
PM05 PS09 |
Do fault finding on a Pneumatic system |
1.33 |
|
|
|
PM06 PS08 |
Repair a Pneumatic system |
1.50 |
|
|
|
PM07 PS08 |
Install pneumatic system components and commission Pneumatic systems |
1.50 |
|
|
|
PM08 PS03 |
Overhaul a mechanical machine that incorporates a hydraulic and Pneumatic System |
6.67 |
|
|
4605 |
MODULES |
Centre Lathe 2 |
12.00 |
25 |
|
|
FT-TH08-M03 |
Operate a centre lathe to produce complex machining operations |
|
|
|
|
PM10 PS02 |
Machine external threads on a centre lathe |
2.00 |
|
|
|
PM10 PS04 |
Perform turning between centres on a centre lathe |
2.00 |
|
|
|
PM11 PS01 |
Machine internal threads on a centre lathe |
4.00 |
|
|
|
PM11 PS02 |
Perform off centre machining on a centre lathe |
4.00 |
|
|
|
|
|
|
|
|
4606 |
MODULES |
Milling Machine 2 |
16.00 |
15 |
|
|
FT-TH08-M06 |
Operate a milling machine to perform complex machining operations |
|
|
|
|
PM11 PS05 |
Setup, calculate and test a dividing head on a conventional milling machine |
4.00 |
|
|
|
PM11 PS04 |
Machine a hexagon on a conventional milling machine |
4.00 |
|
|
|
PM11 PS06 |
Setup calculate and test a turntable on a conventional milling machine |
4.00 |
|
|
|
PM11 PS03 |
Machine internal keyways on a conventional milling machine |
4.00 |
|
|
METAL MACHINIST |
|
|
||||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
||
|
CODE |
CODE |
|
|
(in days) |
||
|
4609 |
652301000 |
METAL MACHINIST ARTISAN APPRENTICE TRAINING YEAR 1 |
42.40 |
40 |
||
|
4610 |
652301000 |
METAL MACHINIST ARTISAN APPRENTICE TRAINING YEAR 2 |
41.34 |
45 |
||
|
4611 |
652301000 |
METAL MACHINIST ARTISAN APPRENTICE TRAINING YEAR 3 |
52.26 |
60 |
||
|
|
|
TOTALS: |
136.00 |
145 |
||
|
PTSA |
652301000 |
CNC MACHINING ESTIMATE FOR BUGET, |
|
15 |
||
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: METAL MACHINIST
SAQA QUAL ID: 93625
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4609 |
652301000 |
METAL MACHINIST ARTISAN APPRENTICE YEAR 1 |
42.40 |
45 |
|
|
|
|
|
|
|
4612 |
|
Induction and Safety |
8.00 |
5 |
|
|
KM01-KT01 |
Introduction to the Metal Machinist Trade |
1.60 |
|
|
|
KM01-KT02 |
Workplace health, safety and environmental protection |
6.40 |
|
|
|
|
|
|
|
|
4613 |
|
Drawings |
4.20 |
5 |
|
|
FT-TH02-MO1 |
Engineering drawings |
|
|
|
|
KM01-KT03 |
Engineering drawings |
3.20 |
|
|
|
PM01 PS03 |
Select and care for engineering measuring instruments |
0.50 |
|
|
|
PM01-PS04 |
Read, interpret and produce basic engineering drawings |
0.50 |
|
|
|
|
|
|
|
|
4614 |
|
Materials |
3.70 |
3 |
|
|
FT-TH02-MO2 |
Engineering materials |
|
|
|
|
KM01 KT04 |
Engineering materials |
3.20 |
|
|
|
PM01 PS05 |
Identify engineering materials, their characteristics and applications |
0.50 |
|
|
|
|
|
|
|
|
4615 |
|
Engineering Tools and Equipment |
19.60 |
20 |
|
|
FT-TH02-M03 |
Engineering tools and equipment |
|
|
|
|
KM01 KT05 |
Engineering tools and equipment |
4.80 |
|
|
|
FT-TH03-M01 |
Perform Grinding Operations |
|
|
|
|
KM02 KT04 |
Types and working principles of pedestal grinding machine |
3.60 |
|
|
|
FT-TH03-M03 |
Operate a Mechanical Saw |
|
|
|
|
PM02 PS09 |
Saw material to specification using a power saw |
0.67 |
|
|
|
KM01 KT07 |
Types and Application of Screw Threads |
3.20 |
|
|
|
FT-TH03-M02 |
Perform Drilling Operations |
|
|
|
|
PM01 PS01 |
Plan and prepare for fabrication of component |
0.50 |
|
|
|
PM01 PS02 |
Select and care for engineering hand tools |
0.50 |
|
|
|
PM01 PS06 |
Mark-off various simple components |
0.50 |
|
|
|
PM01 PS07 |
Fabricate and fit a gasket |
0.50 |
|
|
|
PM01 PS08 |
File work a piece |
0.50 |
|
|
|
PM01 PS09 |
Saw work piece |
0.50 |
|
|
|
PM01 PS11 |
Cut threads with stocks, dies and taps |
0.50 |
|
|
|
PM01 PS12 |
Ream parallel and tapered holes |
0.50 |
|
|
|
PM02 PS01 |
Select and care for engineering power tools |
0.67 |
|
|
|
PM02 PS02 |
Select and care for engineering machines |
0.67 |
|
|
|
PM02 PS03 |
Grind material to specifications using a pedestal grinder |
0.67 |
|
|
|
PM02 PS04 |
Drill material to specifications using a portable drilling machine |
0.67 |
|
|
|
PM02 PS05 |
Drill material to specifications using a fixed drilling machine |
0.67 |
|
|
|
|
|
|
|
|
4616 |
|
Basic Lifting concepts |
3.20 |
2 |
|
|
FT-TH04-M01 |
Lifting Concepts |
|
|
|
|
KM01 KT06 |
Basic lifting concepts |
3.20 |
|
|
|
|
|
|
|
|
4617 |
|
Keys and Locking Devices |
6.90 |
10 |
|
|
FT-TH05-M01 |
Fasteners Locking Devices, Seals and Gaskets |
|
|
|
|
KM01 KT07 |
Types and Application of Screw Threads |
3.20 |
|
|
|
KM01 KT08 |
Types and function of locking devices and fasteners |
3.20 |
|
|
|
PM01 PS10 |
Fabricate and fit a key |
0.50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4792 |
Metal Machinist– Selected Modules |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: METAL MACHINIST
SAQA QUAL ID: 93625
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4610 |
652301000 |
METAL MACHINIST ARTISAN APPRENTICE YEAR 2 |
41.34 |
45 |
|
|
|
|
|
|
|
4618 |
|
Arc and Gas Welding and Cutting |
5.20 |
15 |
|
|
FT-TH03-M01 |
Arc Welding |
|
|
|
|
KM01 KT09 |
Principles, equipment and methods of arc welding, gas cutting, brazing and silver soldering |
3.20 |
|
|
|
PM02 PS06 |
Arc weld metal to specification |
0.67 |
|
|
|
FT-TH03-M02 |
Gas Welding |
|
|
|
|
PM02 PS07 |
Gas weld, silver solder and braze metal to specification |
0.67 |
|
|
|
FT-TH03-M03 |
Gas Cutting |
|
|
|
|
PM02 PS08 |
Gas cut metal to specification |
0.67 |
|
|
|
|
|
|
|
|
4619 |
|
Milling Machine 1 |
11.49 |
10 |
|
|
FT-TH08-M04 |
Operate a milling machine to produce simple components |
|
|
|
|
FT-TH08-M05 |
Operate a milling machine to produce components of intermediate complexity |
|
|
|
|
KM02 KT03 |
Principles, methods and techniques of machining work pieces with a milling machine |
7.20 |
|
|
|
PM09 PS02 |
Set up and operate a convention milling machine to debur, centre drill, chamfer and counter bore a work piece |
1.00 |
|
|
|
PM09 PS09 |
Produce external keyways on a conventional milling machine |
1.00 |
|
|
|
PM10 PS06 |
Machine a square on a conventional milling machine |
2.29 |
|
|
|
|
|
|
|
|
4620 |
|
Centre Lathe 1 |
24.66 |
20 |
|
|
FT-TH08-M01 |
Operate a centre lathe to produce simple components |
|
|
|
|
FT-TH08-M02 |
Operate a centre lathe to produce components of intermediate complexity |
|
|
|
|
KM03 KT01 |
Principles, methods and techniques of fabrication |
3.60 |
|
|
|
KM03 KT02 |
Principles, methods and techniques of machining work pieces with a centre |
7.20 |
|
|
|
PM03 PS01 |
Set up and operate a centre lathe to deburr, centre drill, chamfer and counter bore a work piece |
1.00 |
|
|
|
PM03 PS03 |
Perform drilling on a centre lathe |
1.00 |
|
|
|
PM03 PS04 |
Perform tapping and reaming on a centre lathe |
1.00 |
|
|
|
PM03 PS07 |
Produce parallel and tapered work pieces on a centre lathe |
1.00 |
|
|
|
PM03 PS06 |
Perform grooving and knurling on a centre lathe |
1.00 |
|
|
|
PM03 PS05 |
Perform parting on a centre lathe |
1.00 |
|
|
|
PM04 PS03 |
Machine bushes on a centre lathe |
2.29 |
|
|
|
PM03 PS08 |
Turn an internal radius on a centre lathe |
1.00 |
|
|
|
PM04 PS01 |
Machine external and internal tapers on a centre |
2.29 |
|
|
|
PM04 PS05 |
Perform Centre Lathe turning using fixed and running |
2.29 |
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: METAL MACHINIST
SAQA QUAL ID: 93625
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4611 |
652301000 |
METAL MACHINIST ARTISAN APPRENTICE YEAR 3 |
52.26 |
60 |
|
|
|
|
|
|
|
4621 |
|
Centre Lathe 2 |
12.07 |
25 |
|
|
FT-TH08-M03 |
Operate a centre lathe to produce complex machining operations |
|
|
|
|
PM05 PS02 |
Perform off centre machining on a centre lathe |
3.75 |
|
|
|
PM04 PS02 |
Machine external threads on a centre lathe |
2.29 |
|
|
|
PM05 PS01 |
Machine internal threads on a centre lathe |
3.75 |
|
|
|
PM04 PS04 |
Perform turning between centres on a centre lathe |
2.29 |
|
|
|
|
|
|
|
|
4622 |
|
Milling Machine 2 |
15.00 |
15 |
|
|
FT-TH08-M06 |
Operate a milling machine to perform complex machining operations |
|
|
|
|
PM05PS05 |
Setup, calculate and test a dividing head on a conventional milling machine |
3.75 |
|
|
|
PM05 PS04 |
Machine a hexagon on a conventional milling machine |
3.75 |
|
|
|
PM05 PS06 |
Setup calculate and test a turntable on a conventional milling machine |
3.75 |
|
|
|
PM05 PS03 |
Machine internal keyways on a conventional milling machine |
3.75 |
|
|
|
|
|
|
|
|
4623 |
|
Surface and Cylindrical Grinding Machines |
14.24 |
10 |
|
|
FT-TH03-M01 |
Perform Grinding Operations |
|
|
|
|
KM02 KT05 |
Principles, methods and techniques of machining work pieces with surface and cylindrical grinding machines |
7.20 |
|
|
|
PM03 PS10 |
Grind squares and angles on a surface grinding machine |
1.00 |
|
|
|
PM04 PS07 |
Grind squares and angles on a surface grinding machine |
2.29 |
|
|
|
PM05 PS07 |
Perform gear cutting on a surface grinding machine |
3.75 |
|
|
|
|
|
|
|
Training Outsourced to PTSA Port Elizabeth.
Quotation from PTSA is Required
|
4624 |
|
CNC Machining |
10.95 |
15 |
|
|
KM02 KT06 |
Principles, methods and techniques of machining work pieces with a computer numerical control (CNC) machine |
7.20 |
|
|
|
PM05 PS08 |
Perform support function on CNC machining operations and quality checks on machined components |
3.75 |
|
|
MILLWRIGHT (Mechanical Department) |
|
|
|||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
|
CODE |
CODE |
|
|
(in days) |
|
|
4654 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (MECHANICAL) YEAR 1 |
71.42 |
70 |
|
|
4655 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (MECHANICAL) YEAR 2 |
40.54 |
30 |
|
|
4656 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (MECHANICAL) YEAR 3 |
48.42 |
30 |
|
|
|
|
TOTALS: |
160.37 |
130 |
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MILLWRIGHT
SAQA QUAL ID: 97585
(MECHANICAL MODULES)
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4654 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (MECHANICAL) YEAR 1 |
71.42 |
70.00 |
|
|
|
|
|
|
|
4657 |
MODULES |
INDUCTION |
9.61 |
5 |
|
|
KM02 KT01 |
Introduction to the Millwright Trade |
1.60 |
|
|
|
KM01 KT01 |
Employment |
1.08 |
|
|
|
KM01 KT02 |
Organisation of work |
0.99 |
|
|
|
KM01 KT03 |
Employer-Employee relationships |
0.99 |
|
|
|
KM01 KT04 |
Concepts related to the performance of work |
1.98 |
|
|
|
KM01 KT05 |
Types and structure of employer organisations and the impact of the external environment |
0.99 |
|
|
|
KM01 KT07 |
Ethics at work |
0.99 |
|
|
|
KM01 KT08 |
Current trends influencing work |
0.99 |
|
|
|
|
|
|
|
|
4658 |
MODULES |
COMPUTERS |
8.99 |
3 |
|
|
KM01 KT06 |
Information and communication technology at work |
0.99 |
|
|
|
PM01 PS05 |
Perform basic computer operations |
8.00 |
|
|
|
|
|
|
|
|
4659 |
MODULES |
WORKPLACE SAFETY |
8.00 |
3 |
|
|
KM02 KT02 |
Safety, health, environment, risk and quality principles in the workplace |
6.40 |
|
|
|
PM01 PS03 |
Read and respond to safety signage |
1.60 |
|
|
|
|
|
|
|
|
4660 |
MODULES |
BASIC FIRST AID |
1.60 |
2 |
|
|
PM01 PS01 |
Perform basic first aid |
1.60 |
|
|
|
|
|
|
|
|
4661 |
MODULES |
BASIC FIRE FIGHTING |
1.60 |
1 |
|
|
PM01 PS02 |
Perform basic fire fighting |
1.60 |
|
|
|
|
|
|
|
|
4662 |
MODULES |
ENGINEERING DRAWINGS |
4.60 |
5 |
|
|
FT-TH02-MO1 |
Engineering drawings |
|
|
|
|
KM03 KT01 |
Engineering drawings |
3.60 |
|
|
|
PM02 PS04 |
Read, interpret and produce basic engineering drawings |
0.50 |
|
|
|
|
|
|
|
|
4663 |
MODULES |
ENGINEERING MATERIALS |
4.10 |
3 |
|
|
FT-TH02-MO2 |
Engineering materials |
|
|
|
|
KM03 KT02 |
Engineering materials |
3.60 |
|
|
|
PM02 PS05 |
Identify engineering materials, their characteristics ands applications |
0.50 |
|
|
|
|
|
|
|
|
4664 |
MODULES |
ENGINEERING TOOLS & EQUIPMENT |
16.90 |
20 |
|
|
FT-TH02-M03 |
Engineering tools and equipment |
|
|
|
|
KM03 KT03 |
Engineering tools and equipment |
5.20 |
|
|
|
KM05 KT01 |
Hand tools and power tools (50%) |
4.00 |
|
|
|
PM02 PS01 |
Plan and prepare for fabrication of components |
0.50 |
|
|
|
PM02 PS02 |
Select and care for engineering hand tools |
0.50 |
|
|
|
PM02 PS03 |
Select and care for engineering measuring instruments |
0.50 |
|
|
|
PM02 PS06 |
Mark-off various simple components |
0.50 |
|
|
|
PM02 PS08 |
File workpieces |
0.50 |
|
|
|
PM02 PS09 |
Saw workpieces |
0.50 |
|
|
|
PM03 PS01 |
Plan and prepare for fabrication of complex components |
0.60 |
|
|
|
PM03 PS02 |
Select and care for engineering power tools |
0.60 |
|
|
|
PM03 PS03 |
Select and care for engineering machines |
0.60 |
|
|
|
FT-TH03-M03 |
Operate a Mechanical Saw |
|
|
|
|
PM03 PS07 |
Saw material to specification using a power saw |
0.60 |
|
|
|
FT-TH03-M01 |
Perform Grinding Operations |
|
|
|
|
PM03 PS04 |
Grind material to specifications using a pedestal grinder |
0.60 |
|
|
|
FT-TH03-M02 |
Perform Drilling Operations |
|
|
|
|
PM03 PS05 |
Drill material to specifications using a portable drilling machine |
0.60 |
|
|
|
PM03 PS06 |
Drill material to specifications using a fixed drilling machine |
0.60 |
|
|
|
PM02 PS12 |
Ream parallel and tapered holes |
0.50 |
|
|
|
PM02 PS11 |
Cut threads with stocks, dies and taps |
0.50 |
|
|
|
|
|
|
|
|
4665 |
MODULES |
KEYS AND LOCKING DEVICES |
6.26 |
10 |
|
|
FT-TH05-M01 |
Fasteners Locking Devices, Seals and Gaskets |
|
|
|
|
KM03 KT06 |
Types and functions of locking devices and fasteners |
2.88 |
|
|
|
KM03 KT05 |
Types and applications of screw threads |
2.88 |
|
|
|
PM02 PS10 |
Fabricate and fit keys |
0.50 |
|
|
|
KM04 KT01 |
Static and dynamic seals and gaskets |
3.04 |
|
|
|
PM02 PS07 |
Fabricate and fit gaskets |
0.50 |
|
|
|
|
|
|
|
|
4666 |
MODULES |
BASIC LIFTING CONCEPTS |
5.08 |
3 |
|
|
FT-TH04-M01 |
Lifting Concepts |
|
|
|
|
KM03 KT04 |
Basic lifting concepts |
2.88 |
|
|
|
PM01 PS04 |
Identify, use and care for lifting and support equipment |
2.20 |
|
|
|
|
|
|
|
|
4667 |
MODULES |
ARC WELDING AND GAS WELDING & CUTTING |
4.68 |
15 |
|
|
FT-TH03-M01 |
Arc Welding |
|
|
|
|
KM03 KT07 |
Principles, equipment and methods of arc welding, gas welding, cutting, brazing and silver soldering |
2.88 |
|
|
|
PM03PS08 |
Arc weld metal to specification |
0.60 |
|
|
|
FT-TH03-M02 |
Gas Welding |
|
|
|
|
PM03 PS09 |
Gas weld, silver solder and braze metal to specification |
0.60 |
|
|
|
FT-TH03-M03 |
Gas Cutting |
|
|
|
|
PM03 PS10 |
Gas cut metal to specification |
0.60 |
|
|
|
|
|
|
|
|
4793 |
Millwright Mechanical– Selected Modules |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MILLWRIGHT
SAQA QUAL ID: 97585
(MECHANICAL MODULES)
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4655 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (MECHANICAL) YEAR 2 |
40.54 |
30 |
|
|
|
|
|
|
|
4668 |
MODULES |
Lubrication system |
8.52 |
5 |
|
|
FT-TH07-M08 |
Lubrication System |
|
|
|
|
KM04 KT09 |
Mechanical working principles, types and applications of lubrication systems |
3.04 |
|
|
|
PM08 PS08 |
Clean and inspect lubrication systems |
0.55 |
|
|
|
PM09 PS07 |
Replace lubrication components and assemble lubrication systems |
0.60 |
|
|
|
PM10 PS07 |
Do fault-finding on lubrication systems |
1.33 |
|
|
|
PM11 PS06 |
Repair lubrication systems |
1.50 |
|
|
|
PM14 PS06 |
Install lubrication system components and commission lubrication systems |
1.50 |
|
|
|
|
|
|
|
|
4671 |
MODULES |
Conveyors and Drives |
10.80 |
10 |
|
|
FT-TH07 -M03 |
Drives |
|
|
|
|
FT-TH07 -M11 |
Conveyors |
|
|
|
|
KM04 KT12 |
Types and functions of conveyors |
2.28 |
|
|
|
KM04 KT04 |
Types and application of drives |
3.04 |
|
|
|
PM08 PS06 |
Disassemble, clean and inspect drives |
0.55 |
|
|
|
PM09 PS05 |
Replace drive components and assemble drives |
0.60 |
|
|
|
PM10 PS05 |
Do fault-finding on drives |
1.33 |
|
|
|
PM11 PS05 |
Repair drives |
1.50 |
|
|
|
PM14 PS05 |
Install and commission drives |
1.50 |
|
|
|
|
|
|
|
|
4672 |
MODULES |
Bearings |
5.52 |
5 |
|
|
FT-TH07 -M01 |
Bearings |
|
|
|
|
KM04 KT02 |
Types and application of bearings |
3.04 |
|
|
|
PM08 PS07 |
Remove and inspect bearings |
0.55 |
|
|
|
PM09 PS06 |
Replace bearings |
0.60 |
|
|
|
PM10 PS06 |
Do fault-finding on bearings |
1.33 |
|
|
|
|
|
|
|
|
4673 |
MODULES |
Hydraulics |
11.52 |
5 |
|
|
FT-TH07 -M09 |
Hydraulic Systems |
|
|
|
|
KM04 KT10 |
Mechanical working principles, types and applications of hydraulic systems |
3.04 |
|
|
|
PM04 PS01 |
Build and test basic hydraulic circuits |
1.00 |
|
|
|
PM08 PS09 |
Clean and inspect hydraulic systems |
0.55 |
|
|
|
PM09 PS08 |
Replace hydraulic components and assemble hydraulic systems |
0.60 |
|
|
|
PM10 PS08 |
Do fault-finding on hydraulic systems |
1.33 |
|
|
|
PM11 PS07 |
Repair hydraulic systems |
1.50 |
|
|
|
PM14 PS07 |
Install hydraulic system components and commission hydraulic systems |
1.50 |
|
|
|
PM17 PS01 |
Design and construct hydraulic circuits |
2.00 |
|
|
|
|
|
|
|
|
4674 |
MODULES |
Valves |
4.19 |
5 |
|
|
FT-TH07 -M02 |
Valves |
|
|
|
|
KM04 KT03 |
Types and application of valves |
3.04 |
|
|
|
PM08 PS11 |
Disassemble, clean and inspect valves |
0.55 |
|
|
|
PM09 PS10 |
Replace valve components and assemble valves |
0.60 |
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MILLWRIGHT
SAQA QUAL ID: 97585
(MECHANICAL MODULES)
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4656 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (MECHANICAL) YEAR 3 |
48.42 |
30 |
|
|
|
|
|
|
|
4675 |
MODULES |
PUMPS |
8.52 |
5 |
|
|
FT-TH07-M04 |
Pumps |
|
|
|
|
KM04 KT05 |
Types and application of pumps |
3.04 |
|
|
|
PM08 PS03 |
Disassemble, clean and inspect pumps |
0.55 |
|
|
|
PM09 PS02 |
Replace pump components and assemble pumps |
0.60 |
|
|
|
PM10 PS02 |
Do fault-finding on pumps |
1.33 |
|
|
|
PM11 PS02 |
Repair pumps |
1.50 |
|
|
|
PM14 PS02 |
Install and commission pumps |
1.50 |
|
|
|
|
|
|
|
|
4676 |
MODULES |
CLUTCHES |
8.52 |
5 |
|
|
FT-TH07-M06 |
Clutches |
|
|
|
|
KM04 KT07 |
Mechanical working principles, types and applications of clutches |
3.04 |
|
|
|
PM08 PS05 |
Disassemble, clean and inspect clutches |
0.55 |
|
|
|
PM09 PS04 |
Replace clutch components and assemble clutches |
0.60 |
|
|
|
PM10 PS04 |
Do fault-finding on clutches |
1.33 |
|
|
|
PM11 PS04 |
Repair clutches |
1.50 |
|
|
|
PM14 PS04 |
Install and commission clutches |
1.50 |
|
|
|
|
|
|
|
|
4677 |
MODULES |
BRAKES |
8.52 |
5 |
|
|
FT-TH07-M07 |
Brakes |
|
|
|
|
KM04 KT08 |
Mechanical working principles, types and applications of brakes |
3.04 |
|
|
|
PM08 PS04 |
Disassemble, clean and inspect brakes |
0.55 |
|
|
|
PM09 PS03 |
Replace brake components and assemble brakes |
0.60 |
|
|
|
PM10 PS03 |
Do fault-finding on brakes |
1.33 |
|
|
|
PM11 PS03 |
Repair brakes |
1.50 |
|
|
|
PM14 PS03 |
Install and commission brakes |
1.50 |
|
|
|
|
|
|
|
|
4678 |
MODULES |
GEARBOXES |
11.34 |
10 |
|
|
FT-TH07-M05 |
Gearboxes |
|
|
|
|
KM04 KT06 |
Mechanical working principles, types and applications of reduction gearboxes |
3.04 |
|
|
|
KM04 KT13 |
Diagnostic techniques |
2.28 |
|
|
|
PM08 PS01 |
Plan and prepare disassembly of sub-assemblies |
0.55 |
|
|
|
PM08 PS02 |
Disassemble, clean and inspect gearboxes |
0.55 |
|
|
|
PM09 PS01 |
Replace gearbox components and assemble gearboxes |
0.60 |
|
|
|
PM10 PS01 |
Do fault-finding on gearboxes |
1.33 |
|
|
|
PM11 PS01 |
Repair gearboxes |
1.50 |
|
|
|
PM14 PS01 |
Install and commission gearboxes |
1.50 |
|
|
|
|
|
|
|
|
4679 |
MODULES |
PNEUMATICS |
11.52 |
5 |
|
|
FT-TH07-M010 |
Pneumatics |
|
|
|
|
KM04 KT11 |
Mechanical working principles, types and applications of pneumatic systems |
3.04 |
|
|
|
PM04 PS02 |
Build and test basic pneumatic circuits |
1.00 |
|
|
|
PM08 PS10 |
Clean and inspect pneumatic systems |
0.55 |
|
|
|
PM09 PS09 |
Replace pneumatic components and assemble pneumatic systems |
0.60 |
|
|
|
PM10 PS09 |
Do fault-finding on pneumatic systems |
1.33 |
|
|
|
PM11 PS08 |
Repair pneumatic systems |
1.50 |
|
|
|
PM14 PS08 |
Install pneumatic system components and commission pneumatic systems |
1.50 |
|
|
|
PM17 PS02 |
Design and construct pneumatic circuits |
2.00 |
|
|
MILLWRIGHT (Electrical Department) |
|
|
|||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
|
CODE |
CODE |
|
|
(in days) |
|
|
4640 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (ELECTRICAL) YEAR 1 |
45.26 |
25 |
|
|
4641 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (ELECTRICAL) YEAR 2 |
114.10 |
65 |
|
|
4642 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (ELECTRICAL) YEAR 3 |
47.70 |
48 |
|
|
|
|
TOTALS: |
207.06 |
138 |
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MILLWRIGHT
SAQA QUAL ID: 97585
(ELECTRICAL MODULES)
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4640 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (ELECTRICAL) YEAR 1 |
45.26 |
25 |
|
|
|
|
|
|
|
4643 |
MODULES |
FUNDAMENTALS AND DRAWINGS |
13.10 |
10 |
|
|
KM06 KT01 |
Fundamentals of electricity |
4.55 |
|
|
|
KM06 KT03 |
Electrical appliances |
4.55 |
|
|
|
PM05 PS01 |
Read and interpret electrical diagrams |
2.00 |
|
|
|
PM05 PS02 |
Identify and care for electrical equipment |
2.00 |
|
|
|
|
|
|
|
|
4644 |
MODULES |
SUPPLY SYSTEMS |
22.28 |
10 |
|
|
KM09 KT01 |
Concepts, theory and principles of supply systems |
6.20 |
|
|
|
KM09 KT02 |
Batteries |
3.10 |
|
|
|
KM09 KT03 |
Transformers |
6.20 |
|
|
|
PM06 PS07 |
Install and connect transformers |
6.78 |
|
|
|
|
|
|
|
|
4645 |
MODULES |
LIGHTING SYSTEMS |
9.88 |
5 |
|
|
KM09 KT06 |
Lighting systems |
3.10 |
|
|
|
PM06 PS03 |
Install and connect luminaires |
6.78 |
|
|
4794 |
Millwright Electrical– Selected Modules |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MILLWRIGHT
SAQA QUAL ID: 97585
(ELECTRICAL MODULES)
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4641 |
671202000 |
MILLWRIGHT ARTISAN APPRENTICE (ELECTRICAL) YEAR 2 |
114.10 |
65 |
|
|
|
|
|
|
|
4646 |
MODULES |
WIREWAYS |
36.12 |
30 |
|
|
KM07 KT01 |
Wireways |
3.85 |
|
|
|
KM07 KT02 |
Wiring of installations |
3.85 |
|
|
|
KM07 KT03 |
Earthing and bonding |
3.30 |
|
|
|
KM10 KT01 |
Low voltage protection |
5.00 |
|
|
|
PM06 PS09 |
Install wireways |
6.78 |
|
|
|
PM16 PS01 |
Design and construct electrical circuits |
5.00 |
|
|
|
PM16 PS02 |
Modify electrical circuits |
5.00 |
|
|
|
PM15 PS05 |
Test and verify conformance of single phase installations |
1.67 |
|
|
|
PM15 PS06 |
Test and verify conformance of three phase installations |
1.67 |
|
|
|
|
|
|
|
|
4647 |
MODULES |
CONDUCTORS AND CABLES |
19.76 |
5 |
|
|
KM09 KT04 |
Types of cables and applications |
6.20 |
|
|
|
PM06 PS05 |
Identify and differentiate conductors and cables |
6.78 |
|
|
|
PM06 PS06 |
Joint and terminate conductors and cables |
6.78 |
|
|
|
|
|
|
|
|
4648 |
MODULES |
MOTORS |
58.22 |
30 |
|
|
KM08 KT01 |
Rotating electrical machinery – AC motors |
4.55 |
|
|
|
KM08 KT02 |
Rotating electrical machinery – DC motors |
4.55 |
|
|
|
KM08 KT03 |
Rotating electrical machinery – alternators and generators |
3.90 |
|
|
|
KM09 KT05 |
Switchgear and control gear |
6.20 |
|
|
|
PM06 PS01 |
Install and connect main and control circuits, and switchgear |
6.78 |
|
|
|
PM06 PS02 |
Install, connect and test batteries |
6.78 |
|
|
|
PM15 PS03 |
Test and verify conformance of direct current motors and generators |
1.67 |
|
|
|
PM15 PS01 |
Test and verify conformance of single phase motors |
1.67 |
|
|
|
PM06 PS08 |
Install and connect DC and single- and 3-phase AC motors |
6.78 |
|
|
|
PM13 PS01 |
Dismantle and test DC and AC motors, generators, alternators and transformers |
6.00 |
|
|
|
PM13 PS02 |
Re-assemble DC and AC motors, generators, alternators and transformers |
6.00 |
|
|
|
PM15 PS02 |
Test and verify conformance of three phase motors |
1.67 |
|
|
|
PM15 PS04 |
Test and verify conformance of control systems |
1.67 |
|
|
|
|
|
|
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: MILLWRIGHT
SAQA QUAL ID: 97585
(ELECTRICAL MODULES)
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4642 |
651202000 |
MILLWRIGHT ARTISAN APPRENTICE (ELECTRICAL) YEAR 3 |
47.70 |
48 |
|
|
|
|
|
|
|
4649 |
MODULES |
MEASURING AND TESTING INSTRUMENTS |
16.78 |
10 |
|
|
KM05 KT02 |
Measuring and testing instruments |
4.00 |
|
|
|
PM05 PS03 |
Identify and use portable testing and measuring instruments |
2.00 |
|
|
|
PM05 PS04 |
Identify and use fixed measuring instruments |
2.00 |
|
|
|
PM05 PS05 |
Identify and care for protective devices |
2.00 |
|
|
|
PM06 PS04 |
Install and connect fixed measuring instruments |
6.78 |
|
|
|
|
|
|
|
|
4650 |
MODULES |
ELECTRONICS |
17.58 |
15 |
|
|
KM06 KT02 |
KT02: Electronics (30%)(3.9cr) |
3.90 |
|
|
|
PM07 PS01 |
Read and interpret electronic diagrams |
1.67 |
|
|
|
PM07 PS02 |
Identify and use electronic measuring instruments |
1.67 |
|
|
|
PM07 PS03 |
Identify and test electronic components |
1.67 |
|
|
|
PM07 PS04 |
Construct electronic circuits using soldering |
1.67 |
|
|
|
PM12 PS03 |
Find faults on electronic circuits |
3.50 |
|
|
|
PM12 PS04 |
Replace defective electronic components |
3.50 |
|
|
|
|
|
|
|
|
4651 |
MODULES |
PROGRAMMABLE LOGIC CONTROLLERS |
1.67 |
10 |
|
|
PM07 PS05 |
Install, connect and programme programmable logic controllers |
1.67 |
|
|
|
|
|
|
|
|
4652 |
MODULES |
VARIABLE SPEED DRIVES |
1.67 |
3 |
|
|
PM07 PS06 |
Install, connect and programme variable speed drives |
1.67 |
|
|
|
|
|
|
|
|
4653 |
MODULES |
FAULT FINDING |
10.00 |
10 |
|
|
KM11 KT01 |
Fault finding (100%)(3.0cr) |
3.00 |
|
|
|
PM12 PS01 |
Find faults on electrical circuits, live and dead |
3.50 |
|
|
|
PM12 PS02 |
Replace or repair defective electrical components |
3.50 |
|
|
WELDER |
|
|
||
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4540 |
651202000 |
WELDER ARTISAN APPRENTICE YEAR 1 |
85.00 |
55 |
|
4547 |
651202000 |
WELDER ARTISAN APPRENTICE YEAR 2 |
96.00 |
55 |
|
4554 |
651202000 |
WELDER ARTISAN APPRENTICE YEAR 3 |
56.00 |
35 |
|
|
|
TOTALS: |
237.00 |
145 |
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: WELDER
SAQA QUAL ID: 94100
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4547 |
651202000 |
WELDER ARTISAN APPRENTICE YEAR 2 |
96.00 |
55 |
|
|
|
|
|
|
|
4548 |
MODULES |
GAS METAL ARC WELDING 1 |
21.00 |
10 |
|
|
KM14 KT01 |
The MIG/MAG/FCAW process |
7.00 |
|
|
|
PM04 PS01 |
Perform a single pass fillet weld using the Gas Metal Arc Welding process |
6.00 |
|
|
|
PM07 PS01 |
Perform a single pass plate butt weld using the Gas Metal Arc Welding process |
8.00 |
|
|
|
|
|
|
|
|
4549 |
MODULES |
GAS TUNGSTEN ARC WELDING 1 |
23.00 |
10 |
|
|
KM15 KT01 |
The Tungsten Inert Gas (TIG) welding process |
7.00 |
|
|
|
PM05 PS01 |
Perform a single pass fillet weld using the Gas Tungsten Arc Welding process |
8.00 |
|
|
|
PM08 PS01 |
Perform a single pass plate butt weld using the Gas Tungsten Arc Welding process |
8.00 |
|
|
|
|
|
|
|
|
4550 |
MODULES |
ARC AND GAS GOUGING |
8.00 |
5 |
|
|
KM05 KT01 |
Cutting and gouging |
2.00 |
|
|
|
PM02 PS02 |
Gouge material using oxy fuel and plasma |
3.00 |
|
|
|
PM02 PS03 |
Preform carbon arc gouging of carbon steel |
3.00 |
|
|
|
|
|
|
|
|
4551 |
MODULES |
SHIELDED METAL ARC WELDING 2 |
14.00 |
10 |
|
|
PM03 PS02 |
Perform a multi pass fillet weld using the Shielded Metal Arc Welding process |
6.00 |
|
|
|
PM06 PS02 |
Perform a multi pass plate butt weld using the Shielded Metal Arc Welding process |
8.00 |
|
|
|
|
|
|
|
|
4552 |
MODULES |
GAS METAL ARC WELDING 2 |
14.00 |
10 |
|
|
PM04 PS02 |
Perform a multi pass fillet weld using the Gas Metal Arc Welding process |
6.00 |
|
|
|
PM07 PS02 |
Perform a multi pass plate butt weld using the Gas Metal Arc Welding process |
8.00 |
|
|
|
|
|
|
|
|
4553 |
MODULES |
GAS TUNGSTEN ARC WELDING 2 |
16.00 |
10 |
|
|
PM05 PS02 |
Perform a multi pass fillet weld using the Gas Tungsten Arc Welding process |
8.00 |
|
|
|
PM08 PS02 |
Perform a multi pass plate butt weld using the Gas Tungsten Arc Welding process |
8.00 |
|
QUALIFICATION TITLE: OCCUPATIONAL CERTIFICATE: WELDER
SAQA QUAL ID: 94100
|
COURSE |
CURRICULUM |
COURSE |
CREDITS |
DURATION |
|
CODE |
CODE |
|
|
(in days) |
|
4554 |
651202000 |
WELDER ARTISAN APPRENTICE YEAR 3 |
56.00 |
35 |
|
|
|
|
|
|
|
4555 |
MODULES |
WELDING QUALITY CONTROL |
4.00 |
5 |
|
|
KM16 KT01 |
Inspection and testing |
2.00 |
|
|
|
KM15 KT02 |
Quality control and assurance in welding |
2.00 |
|
|
|
|
|
|
|
|
4556 |
MODULES |
SHIELDED METAL ARC WELDING 3 |
16.00 |
10 |
|
|
PM09 PS01 |
Preform a multi pass pipe butt weld using the Shielded Metal Arc Welding process |
16.00 |
|
|
|
|
|
|
|
|
4557 |
MODULES |
GAS METAL ARC WELDING 3 |
16.00 |
10 |
|
|
PM10 PS01 |
Preform a multi pass pipe butt weld using the Gas Metal Arc Welding process |
16.00 |
|
|
|
|
|
|
|
|
4558 |
MODULES |
GAS TUNGSTEN ARC WELDING 3 |
20.00 |
10 |
|
|
PM11 PS01 |
Preform a multi pass pipe butt weld using the Gas Tungsten Arc Welding process |
20.00 |
|
Please Click On This Link To Return To Courses
Eastcape Training Centre
By considering Eastcape Training Centre, you are taking the first step in assuring your future.